Top Seller
no-image_en.png
Location:
Hialeah, FL
Manufacturer:
Edwards presses

Specifications

Condition:
used
Stock number:
4072
Division:
Metalworking
Export crating:
800.00
1" pipe notching dies:
448.00
2" pipe notching dies:
536.00
1/2" pipe notching dies:
391.00
3/4" pipe notching dies:
420.00
1-1/2" pipe notching dies:
508.00
1-1/4" pipe notching dies:
478.00
Freight from factory to miami:
1,500.00
Square punch & die (up to 3/4"):
per/set . 116.00
Round punch & die (1/8" to 1-1/16"):
per/set . 31.00

Description

OPTIONAL ACCESSORIES:
5 HP, 1725 RPM motor wired for 220/1/60 operation . . . . . . . . . $ 300.00
Punch and die starter box (contains 8 sets of punches & dies) . . . 303.00
Round punch & die (1/8" to 1-1/16") . . . . . . . . . . . per/set . 31.00
Square punch & die (up to 3/4") . . . . . . . . . . . . . per/set . 116.00
Oblong punch & die (up to 1-1/16" x 1-1/16"). . . . . . . per/set . 132.00
Oversize plate and coupling nut-complete set. . . . . . . . . . . . 578.00
Round punch & die 1-1/16" thru 1-9/16". . . . . . . . . . per/set . 61.00
Notcher table and blades, 2" x 3" x 1/4". . . . . . . . . . . . . . standard
90 degree angle notcher 3" x 3" x 1/4". . . . . . . . . . . . . . . 1,086.00
Rod shear and housing, 1/4", 3/8", 1/2", 5/8", 3/4", 1" round . . . 1,270.00
Brake attachment--75 ton--12" 4 way die . . . . . . . . . . . . . . 1,215.00
Pipe notcher housing for 1/2" to 2" OD tubing (schedule 40) . . . . 347.00
1/2" pipe notching dies . . . . . . . . . . . . . . . . . . . . . . 391.00
3/4" pipe notching dies . . . . . . . . . . . . . . . . . . . . . . 420.00
1" pipe notching dies . . . . . . . . . . . . . . . . . . . . . . . 448.00
1-1/4" pipe notching dies . . . . . . . . . . . . . . . . . . . . . 478.00
1-1/2" pipe notching dies . . . . . . . . . . . . . . . . . . . . . 508.00
2" pipe notching dies . . . . . . . . . . . . . . . . . . . . . . . 536.00
Export crating. . . . . . . . . . . . . . . . . . . . . . . . . . . 800.00
Freight from factory to Miami . . . . . . . . . . . . . . . . . . . 1,500.00
STANDARD FEATURES:
Punch strippers, Fast adjusting holddown bars, Direct drive pump
Fully guarded, Complete punch system, Remote foot pedal operation
Reversible shear blades for extended life
Low rake angle on shear blades
Hydraulic system charged and ready to operate, Sound insulated
Tray for cut stock, Integral lifting lug for instant portability
SPECIFICATIONS:
PUNCH STATION:
Tonnage 75
Throat 10"
Capacity 1-1/4" thru 3/4"
Largest punch accepted with
--standard punch holder 1-1/16"
--oversized punch holder 1-1/2"
Largest die accepted with
--standard die holder 1-1/4"
--oversized die holder 1-5/8"
Open height 8-1/4"
Shut height 6-3/4"
Stroke 1-1/2"
Table size (standard) 8" x 12"
BAR SHEAR
Maximum cutting length 14"
Cutting capacity--maximum width 1/2" x 14"
--max thickness 3/4" x 10"
Maximum bar shearing--round 1-1/8"
--square 1"
ANGLE SHEAR
Maximum angle @ 90 degree 5" x 5" x 3/8"
COPER NOTCHER (Optional)
Maximum cut 2-1/2" x 5" x 1/2"
MOTOR & ELECTRICS
Motor power 5 HP
Electrics--standard 208-220/3/60
--optional 440/3/60
--optional 220/1/60
DIMENSIONS
Dimensions (W x L x H) 38" x 44" 60"
Net weight 2975 lbs