no-image_en.png
Location:
Longview, TX

Specifications

Condition:
used
Stock number:
1612
Saddle:
26” WIDE
Weight:
3,300 LBS.
Division:
Metalworking
Accurancy:
0.0002” TIR
Ram travel:
18.5”
Table size:
50” X 10”
Knee travel:
15.3”
Quill travel:
Spindle motor:
5HP
Wiring voltage:
220 VOLT
Throat distance:
9.8” TO 28.3”
Travels (x and y):
39” X 16.3”
Spindle nose taper:
NST 40
Head tilt (rt. to left):
90 DEGREES
Head tilt (up and down):
45 DEGREES
T-slots number and size:
3 SLOTS, 5/8”
Quill feeed 3 speed (ipr):
0015, .003, .005
Spindle variable speed drive:
60-4,500 RPM
Spindle gageline to table top:
5.375” – 16.9”
Subcategory:
Millers, vertical

Description

SPECIFICATIONS:
TABLE SIZE: 50” X 10”
T-SLOTS NUMBER AND SIZE: 3 SLOTS, 5/8”
SADDLE: 26” WIDE
TRAVELS (X AND Y): 39” X 16.3”
QUILL TRAVEL: 5”
RAM TRAVEL: 18.5”
KNEE TRAVEL: 15.3”
THROAT DISTANCE: 9.8” TO 28.3”
SPINDLE GAGELINE TO TABLE TOP: 5.375” – 16.9”
SPINDLE MOTOR: 5HP
WIRING VOLTAGE: 220 VOLT
SPINDLE NOSE TAPER: NST 40
SPINDLE VARIABLE SPEED DRIVE: 60-4,500 RPM
QUILL FEEED 3 SPEED (IPR): .0015, .003, .005
ACCURANCY: 0.0002” TIR
HEAD TILT (RT. TO LEFT): 90 DEGREES
HEAD TILT (UP AND DOWN): 45 DEGREES
WEIGHT: 3,300 LBS.
FEATURES:
HARDENED AND GROUND BOXWAYS ON SADDLE AND COLUMN
VARI SPEED DRIVE
5 HP MOTOR
#40 SPINDLE TAPER
DUAL COOLING FANS
MEEHANITE CASTING
ABEC-7 SUPER PRECISION SPINDLE BEARINGS
TURCITE-B COATING (X,Y)
CROSS WAY COVER
SELF LUBRICATING MOTOR SHAFT EXTENDS PULLEY LIFE
STANDARD EQUIPMENT:
FROTN AND REAR WAY COVERS
ONE SHOT LUBRICATION SYSTEM
MANUAL DRAWBAR
TOOL KIT WHICH INCLUDES: MANUAL, HALF NUT WRENCH, WRENCH 17M,19M, SET OF 6 ALLEN WRENCHES, PHILIP SCREW DRIVER, FLAT HEAD SCREW DRIVER, OIL CAN, GREASE GUN, REAR WAY COVER BRACKETS, PIN FOR INDICATOR
CAN OF PAINT
INSTALLED OPTIONS:
X AXIS TABLE FEED
Z AXIS TABLE FEED
KURT SWIVEL BASE VISE
POWER DRAW BAR
HALOGEN WORK LIGHT
52 PC. CLAMP KIT
NEWALL 2 AXIS DRO