Top Seller
220 Ton, SCHULER, 35"Str, 36"DLO,
Location:
Ringwood, NJ
Manufacturer:
Schuler presses
Stroke:
35.4"

Specifications

Condition:
used
Stock number:
2190
Bed size:
63" x 55" Tee Slotted
Coil car:
67" L x 65" W x 29" H
Division:
Metalworking
Ram face:
63" x 55" Tee Slotted
Uncoiler:
78" L x 60" W x 112" H with Hold Down Arm Raised x 4,800 Lbs.
Ram stroke:
35.4"
Feed length:
004" Minimum to 393.7" Maximum
Strip width:
6" Minimum to 36" Maximum
Straightener:
100" F-B x 70" L-R x 80" H x 6,100 Lbs.
Servo roll feed:
82" F-B x 78" L-R x 83" H x 5,900 Lbs.
Strip thickness:
035" Minimum to .055" Maximum
Hydraulic system:
11' L x 5-1/2' W x 9' H x 11,000 Lbs.
Maximum coil o.d:
43.3"
Maximum ram speed:
15.75 Inches Per Second (945 IPM)
Minimum ram speed:
1.85 Inches Per Minute
Press laying down:
233" L x 127" W x 86" H x 59,000 Lbs.
Strip thickness 2:
035" to .055" Maximum
Skid with radiator:
48" L x 45" W x 12" H x 100 Lbs.
Power expansion range:
18.5" to 20.9"
Skid with press cushion:
4' L x 4' W x 33" H
Plastic basket with wiring:
32" L x 30" W x 36" H
Maximum weight of upper die:
6,615 Lbs.
Skid with misc. banded to skid:
60" L x 40" W x 12" H x 100 Lbs.
Subcategory:
Presses, hydraulic

Description

220 TON SCHULER HYDRAULIC PRESSPRICE: Loaded on Truck
Serial # H/7610 New 2001 Model # HPDZb200
SPECIFICATIONS:
Bed Size: 63" x 55" Tee Slotted
Ram Face: 63" x 55" Tee Slotted
Ram Stroke: 35.4"
Maximum Daylight Over 9" Thick Bolster Plate: 36"
24" Wide Windows
Maximum Ram Speed: 15.75 Inches Per Second (945 IPM)
Minimum Ram Speed: 1.85 Inches Per Minute
69.4 Ton Capacity Bed Cushion with 17.7" Stroke, CNC Controlled
3.3 Ton Ejector in Ram with 9.45" Ejector Stroke
Maximum Weight of Upper Die: 6,615 Lbs.
Maximum Offset Ram Load Left & Right: 147,520 Lbs.
Maximum Offset Ram Load Front & Back: 73,760 Lbs.
Allen Bradley Versa View 1500 PLC Control, Pendant Mounted
Snap Thru Dampening
200 HP, 3 Phase, 60 Cycle, 480 Volt Main Hydraulic Pump Motor
EQUIPPED WITH:
Heat Exchanger & Oil Cooler
Schuler Feed Line, Feeding from the Back to the Front
Schuler Servo Roll Feed, New 2001, Type WV-KR-160-1050
Strip Width: 6" Minimum to 36" Maximum
Strip Thickness: .035" Minimum to .055" Maximum
Feed Length: .004" Minimum to 393.7" Maximum
Power Adjustable Passline Height
Power Elevation to Material Infeed Tray Rollers
Siemens Servo Drive Motor
Schuler Straightener, New 2001, Model RCS-6-70/160-1050
Strip Width: 6" Minimum to 36" Maximum
Strip Thickness: .035" to .055" Maximum
(6) Straightening Rolls with Manual Adjustment & Dials
Indicator Readout
Pinch Rolls on Exit Side
Materials Width Guide Rollers with Manual Adjustment
Top Half of Straightener has Power Lift for Material Loading & Maintenance
Power Raise & Lower to Material Infeed Tray & Rollers
Loop Control Arm
3.7 KW SEW Eurodrive Motor, Wired 3 Phase, 60 Cycle, 277-480 Volts
Schuler Motorized Uncoiler, New 2001, Type HES-12-1000
10,000 Lb. Weight Capacity
Strip Width: 6" Minimum to 36" Maximum
Maximum Coil O.D.: 43.3"
Power Expansion Range: 18.5" to 20.9"
(6) Coil Keeper Arms
Hold Down Arm, Hydraulic Raise & Lower with Adjustable Pressure
Schuler Motorized Coil Arm with:
(2) 100" Long Sections of Track
Schuler Operator Control Console for the Feed Line with:
Hand Held Pendant, Auto Threading & Job Memory
SPR-2000 Sproller Stock Lubricator
DIMENSIONS:
Press Laying Down: 233" L x 127" W x 86" H x 59,000 Lbs.
Hydraulic System: 11' L x 5-1/2' W x 9' H x 11,000 Lbs.
Servo Roll Feed: 82" F-B x 78" L-R x 83" H x 5,900 Lbs.
Straightener: 100" F-B x 70" L-R x 80" H x 6,100 Lbs.
Uncoiler: 78" L x 60" W x 112" H with Hold Down Arm Raised x 4,800 Lbs.
Skid with Fence Enclosure for Feed Line: 160" L x 84" W x 44" H
Hydraulic System for Uncoiler Sitting on Skid: 45" L-R x 48" F-B x 24" H
Electric Control Cabinet with AC Unit: 126" L x 30" W x 89" H
Schuler Electric Switchgear Cabinet, 480 Volts: 71" L x 21" W x 89" H
Skid with Stock Lubricator & Feedline Pendant Control: 45" L-R x 48" F-B x
24" H
Schuler Operator Control Console Laying Down on Skid: 43" L-R x 33" F-B x 24"
H
Catwalk, Ladder & Support Legs Banded Together: 10' L x 63" W x 70" H
Catwalk, Misc. Hydraulic Lines & PLC Control: 136" L x 39" W x 53" H
Skid with