Location:
Roxboro, NC

Specifications

Condition:
used
Stock number:
CC-153
Material:
2.77 sq. in. max cross-section at 28,000psi yield strength
Coil size:
ID - 18.5 - 24.5" / 470-622mm OD - 72" max / 1829mm Wt - 50,000lbs / 22.6mtons
Footprint:
400 ft L x 30 ft W x 41 ft H
Line speed:
200 fpm max / 61 mpm
Strip width:
24 - 51.25' / 610 - 1302mm
Strip thickness:
.011 - .054" / 0.27 - 1.37mm
Equipment- coater:
2 roll type
Line configuration:
Single coat line Ran steel roofing deck
Equipment- oxidizer:
1472 deg F reactor temp / 800C at 0.75 second dwell time
Equipment- recoiler:
One mandrel type rewind Hyd expansion, hyd push-off 14,668 lbs tension Belt wrapper
Equipment- uncoiler:
Dual mandrel type payoffs Hyd expansion, 6089lbs tension
Equipment- chem coater:
Horizontal Over/under type
Equipment- chem coat dryer:
Included
Equipment- exit accumulator:
79 seconds of storage @ 200fpm
Equipment- exit temperature:
130 deg F / 54 deg C at 24 sec dwell time at 200 fpm + quench
Reference coating- top side:
0.5 mil dry film / 13 microns
Equipment- entry accumulator:
79 seconds of storage @ 200fpm
Equipment- treatment section:
Seven stages Clean-brush-clean-hot rinse- phosphoric acid-hot rinse- reverse osmosis rinse
Reference coating- bottom side:
0.5mil dry film / 13 microns
Reference coating- coating solids:
55% by volume
Equipment- peak metal temperature (pmt):
480 deg F / 250 deg C
Subcategory:
Coil coating
Subcategory 2:
Coil coating lines