Location:
Roxboro, NC
Manufacturer:
N/A

Specifications

Condition:
used
Stock number:
CC-157
Design:
Single coat line
Line speed:
Rated: 275 fpm / 84 mpm Actual ran: 300 fpm / 91.4 mpm
Manufacture:
Hunter and GFG New in 1975 Reinstalled 1984 with upgrades
Strip width:
60" max / 1524 mm 66" w/o tension leveling secti
Exit coil size:
ID - 16" / 406mm OD - 70" max / 1778mm Wt - 48,000 lbs / 10.89 mtons
Entry coil size:
ID - 20" / 508mm OD - Wt. - 50,000 lbs / 11.34 mtons
Equipment- oven:
90 ft long / 27.4m 3-zone gas-fired catenary type Exit water quench Exit air quench
Strip thickness:
.008 - .020" / 0.20 - 0.51mm
Equipment- waxer:
GFG / 2-12mg per sq ft laydown
Equipment- coater:
GFG, 2 side coat Rolls: 10" diam x 72" face
Equipment- roll 1:
25hp,1750/2500rpm,34.13:1ratio
Equipment- roll 2:
50hp,1750/2500rpm,330.23:1rati
Equipment- roll 3:
150hp,1750/2500rpm,34.5:1ratio
Equipment- roll 4:
75hp,1750/2500rpm,33.02:1ratio
Equipment- coil car:
Above ground, 50,000lbs
Equipment- recoiler:
60hp,500/2000rpm,18,611:1ratio Mandrel type, belt wrapper Coil car, downender
Equipment- uncoiler #1:
80hp, 800/1500rpm, 15.983:1
Equipment- scrap winder:
Mandrel / with coil car
Equipment- strip joiner:
Behlen, Single die
Equipment- uncoilers #2:
80hp, 800/1500rpm, 15.983:1
Equipment- tension leveler:
60" max width
Equipment- cleaning section:
5 stage system Sections 1-2 = vertical Sections 3-4-5 = horizontal Vertical Air blow off
Equipment- exit accumulator:
Rolls: 12.8" diam, 9 over 8 Strip storage:60sec at 300fpm
Equipment- entry accumulator:
Rolls: 12.8" diam, 9 over 8 Strip storage: 60sec at 300fpm
Equipment- paint flow out booth:
15 ft section
Equipment- bwg flex-roll section:
5 roll cassettes Work rolls: 1.125" & 1.75" dia B/up Rolls: 2.25" dia
Equipment- exit bridle (line bridle #4):
2 roll unit
Equipment- entry bridle (line bridle #3):
2 roll unit
Subcategory:
Coil coating
Subcategory 2:
Coil coating lines