1992 DIMTER DFU / FL4500hW
Location:
Düsseldorf, Germany
Manufacturer:
Dimter
Model:
DFU / FL4500hW

Specifications

Condition:
used
Year:
1992
Beam widths:
as required according counter of dry joint
Board widths:
16 – 42 mm( 0.62 – 2.5” )
Panel widths:
mm ( 12” – 4.2’ )
Board lengths:
mm ( 8 ‘ – 15 ‘ )
Subcategory 2:
Run presses
Subcategory 3:
Durchlaufverleimanlage
Compressed air:
8 bar ( 120 psi )
Condition info:
Used machine very good condition
Board lengths 2:
1.500 mm ( 5’ – 15’ )
Board thickness:
17 – 42 mm ( 0.6” – 5.6” )
Board thicknesses:
16 – 42 mm ( 0.6 “ – 2.5” )
Board widths ( on edge ):
16 – 62 mm ( 0.6” – 2.5 “ )
Panel lengths (after saw ):
1.500 mm mini (5’ mini )
Panel lengths ( before saw):
1.500 – 4.6 mm (5’ – 15’ )
Max number of boards at glue applicator:
20 / min !!
Subcategory:
Presses

Description

Dimter throughfeed gluing line DFU /FL 4500 HW
Universal gluer for edge AND face gluing
(panel and small beam production)
For Softwood and PVA glue (Melamine or urea possible , but needs
another gluing application system glue mixing –glue nozzles etc .)
Dimter version as well proved through feed system with hotwater pressbed and dry joint for final panel or beam width
Consisting of the following items
- Crosstransfer as feeding- respectively loading station with 2,5m 8 8 ‚ ) buffer area
- Angle station and feeding rollers
- Glue application for edge gluing ( glue nozzle lateral )
- Glue application for face gluing ( glue nozzle from the top )
With piece counter for dry glue line
- packet assembling station with universal turning station
- ( when face gluing are boards turned on edge )
- Packet composing station with max. 700 mm ( 27“ ) width
- Longitudinal transport of the packet via wide roller way to infeed position
- Heavy duty hydraulic infeed system
- Hydraulic pushing unit , stroke 700 mm /(27” )
- Heavy duty front frame with hydr. Anti-kick elements ( Dimter patent )
- ( keeps the specific gluing pressure during and after the infeed cycle )
- Presssing area with heating tubes top and bottom , length 7 m ( 23’ )
- special version with additional cooling area of 3m ( 10 ‘ ) to cool down the PVA glue
- ( could be converted into heating area as well , when Melamine or Urea glue is used )
- with rear frame with hydr. Braking elements to provide the specific gluing pressure
- shear - off device to separate reliably the dry glue line if q drop of glue is there
- with unloading device by means of lateral chains and - ( ideally when changing crucial dimensions quicker from edge to face gluing )
- Cross transfer chains to transfer panels or beams to following processing station
Connection with existing Dimter cut-to-width saw and stacking station
- angle station and wide roller way , length 6.5 m ( 21 ‘ ) width 1.3 m ( 4 .2 feet )
- With automatic cut-to-width saw to trim the ends or of panel resp. beams
- Longitudinal transport via wide roller way length 7 .5 m ( 24 ‘ )after saw
With adjaustable full stop according required panel width
- Outfeed wide roller way approx . length of 10 m ( 33 ‘ )
With lateral heavy duty ejection bars and integrated stacking arms ( retractable m)
For composing the layer up to 1.2 m ( 4 ‘ ) width
- Hydraulic lifting table to compose the stack up to 1.2 m ( 4 ‘ )in height
- Attention, for this height of stack the hydr. Lifting table needs to go into ground floor
- Height of table base . approc 0.45 m ( 18 “ )
Production and technical datas
Version face gluing
Board widths ( on edge ) : 16 – 62 mm ( 0.6” – 2.5 “ )
Board thickness : 17 – 42 mm ( 0.6” – 5.6” )
Board lengths : mm ( 8 ‘ – 15 ‘ )
Beam widths : as required according counter of dry joint
Version edge gluing
Board lengths : 1.500 mm ( 5’ – 15’ )
Board thicknesses : 16 – 42 mm ( 0.6 “ – 2.5” )
Board widths : 16 – 42 mm( 0.62 – 2.5” )
Panel dimensions
Pan