2002 PRIESS & HORSTMANN BAT-DTW-BMA-DL-CNC
Location:
Ireland
Price:
$435,600 USD
Manufacturer:
BAT boring mills
Model:
BAT-DTW-BMA-DL-CNC

Specifications

Condition:
used
Year:
2002
Recnum:
BF-010055
Comments:
WE CHALLENGE ANYONE to supply drilling pattern this system cannot process in ONE PASS! Under power, available for demo & immediate delivery!
Machtype:
BORING MACH. (FEED THRU CNC PANEL LINE)
Condition info:
(6-8) Very good condition [6]
Current status:
Active
Elect./voltage:
400 V, 50 Hz, 3 Ph.
Appr. repl. cost:
940000

Description

PRIESS & HORSTMANN BAT-DTW-BMA-DL-CNC BORING MACH. (FEED THRU CNC PANEL LINE):

-- Specifications:J.I.T. Panel Processing Line W/DRILLING, DOWELING and ROUTING; Feed Thru Horizontal & Vertical Drilling, Doweling & Routing Line with batch run or one off capabilities; aLL CNC controlled. All units travel on precision guides/ways with accurate servo positioning; all axes are CNC controlled with programming/optimizing software for "Batch" or "1-of" panel quantities.

-- Position # 1:Priess & Horstmann "HEDGEHOG" Panel Feeder; powered by 0.75 kW (1 HP) motor, ma010713are driven by a 0.55 kW (0.75 HP) motor, variable positioning speed of 40 to 80 MPM (131 to 262 FPM).

-- Position # 2:Priess & Horstmann "BAT-DTW-CNC; workpiece dimensions are 300 - 2,500 mm (11.8" - 98.4") long x 130 mm - 1,000 mm (11.8" - 39.3") wide x 12 mm - 40 mm (0.47" - 1.57") thickness. CNC drilling - unit # 1Consist of (18) individually controlled vertical spindles in the "Y" axis for construction & drawer runner holes, 2.2 kW (3 HP) - 6,000 RPM motor. CNC drilling - unit # 2Consist of (12) individually controlled vertical spindles in the "Y" axis for construction & drawer runner holes, 1.6 kW (2 HP) - 7,500 RPM motor. CNC drilling - unit # 3Consist of (12) individually controlled vertical spindles in the "X" axis for line / hardware holes, 1.6 kW (2 HP) - 7,500 RPM motor. CNC drilling - unit # 4Consist of (12) individually controlled vertical spindles in the "X" axis for line / hardware holes, 1.6 kW (2 HP) - 7,500 RPM motor.CNC drilling - unit # 5Consist of (12) individually controlled vertical spindles in the "Y" axis for construction & drawer runner holes, 1.6 kW (2 HP) - 7,500 RPM motor. CNC drilling - unit # 6 Consist of (9) individually controlled vertical spindles in the "X" axis for line / hardware holes, 1.6 kW (2 HP) - 7,500 RPM motor. CNC drilling - unit # 7Consist of (9) individually controlled vertical spindles in the "X" axis for construction & drawer runner holes, 2.2 kW (3 HP) - 6,000 RPM motor. CNC drilling - unit # 8Consist of (1) additional CNC controlled Point to Point vertical spindle in the "X" axis that can bore in sequence 0.75 kW (1 HP) - 3,000 RPM motor.

-- Position # 3: Priess & Horstmann "BAT-DTW-CNC; workpiece dimensions are 300 - 2,500 mm (11.8" - 98.4") long x 130 mm - 1,000 mm (11.8" - 39.3") wide x 12 mm - 40 mm (0.47" - 1.57") thickness. CNC drilling - unit # 1Consist of (18 + 18) individually controlled horizontal spindles in the "Y" direction for construction drilling of the top & bottom edges of the panel, 2.2 kW (3 HP) - 6,000 RPM motor. CNC horizontal doweling - unit # 2Consist of (10) in-line horizontal glue & dowel driving stations; The glue & dowel head rotates from 0° to 180° via CNC control in order to process both the top & bottom edges of the panel, (2) vibrating hoppers each with (5) dowel tubes, low dowel level indicator, (1) high pressure glue tank & (1) water back wash tank. CNC drilling - unit # 3Consist of (9) individua