Top Seller
PMMA (Acrylic) Extrusion Line -
Perth Amboy, NJ


Stock number:
plant# 387
750-850 Kg/Hr
extrusion direction roughly 5%
2 – 12 mm
Control side:
Left hand side in extrusion
Power supply:
3 x 480 V, 60 Hz
Useful width:
2050 mm
Machine color:
RAL 7032
Width accuracy:
less than or equal to 0.5 mm
Cross direction:
0 roughly 0.5%
Length accuracy:
within 2.0 mm (roughly 1.0 mm)
750 – 850 Kg/Hr
Average used power:
615 KW
Max. air consumption:
8.8 Nm3/hour
Total installed power:
1025 KW
Contemporaneity factor:
Installed motive power:
555 KW
Max. water consumption:
26.6 m3/hour
Installed heating power:
470 KW
Chemical plants


Phoenix Equipment has for sale an unused 750-850 Kg/Hr OMIPA OM-150 (Acrylic) Extruder for processing raw PMMA. This extrusion line has never been used and all equipment is still in original packing. The useful width is 2050 mm, thickness 2-12 mm, production/hour is 750-850 Kg/Hr, Power Supply: 3 x 480 V, 60 Hz. The control is on the left hand side in extrusion direction. The total installed power is 1025 KW, installed motive power is 555 KW, and installed heating power is 470 KW. The Extrusion Line’s contemporaneity factor is 0.6, the average power used is 615 KW, Max. Water Consumption is 26.6 m3/hour, Max. Air Consumption is 8.8 Nm3/hour, Machine Color: RAL 7032.
Major Equipment
This PMMA (ACRYLIC) extrusion line for sale and available at Phoenix Equipment has the following basic information:
Basic Information
•Useful Width: 2050 mm
•Thickness: 2 – 12 mm
•Production/hour: 750 – 850 Kg/Hr
•Power Supply: 3 x 480 V, 60 Hz
•Control Side: Left hand side in extrusion
•Total Installed Power: 1025 KW
•Installed Motive Power: 555 KW
•Installed Heating Power: 470 KW
•Contemporaneity Factor: 0.6
•Average Used Power: 615 KW
•Max. Water Consumption: 26.6 m3/hour
•Max. Air Consumption: 8.8 Nm3/hour
•Machine Color: RAL 7032
Product Performance
•Width Accuracy: less than or equal to 0.5 mm
•Length Accuracy: within 2.0 mm (roughly 1.0 mm)
•Shrinkage: extrusion direction roughly 5%
•Cross direction: 0 roughly 0.5%
•Thickness tolerances:
2.0 – 2.9 mm, roughly 2.0%
3.0 – 6.0 mm, roughly 1.5%
6.0 – 12.0 mm, roughly 1%
PMMA can be general purpose grade and optical grade and is the synthetic polymer of mma, produced by emulsion polymerization, solution polymerization, suspension polymerization, and bulk polymerization.
PMMA, Acrylics, Polymethyl Methacrylate