- So much "Membrane Press", complete and with (2) shuttle trays for such low price!
- MEMBRANE PRESS
- Condition info:
- (3-6) Good Condition 
- Current status:
- 480 V, 60 Cy, 3 Ph.
- Appr. repl. cost:
- Presses-mem/vac /emboss
ITALPRESSE LOCKFORM Membrane (less) Membrane Press (Dual Shuttle); Designed for lamination of pre-shaped and glued panels with PVC and Kydex films without the use of a membrane. This concept allows for cycle times as short as (1-1/2 - 2) Min depending on the film thickness.Specifications:
-- Useful platen dimensions: 49" x 102" (overall dimension 57" x 110"); PVC foil width from 55.9"- 57" (1,420 - 1,250 mm).
-- Total daylight opening is 8" for a max. workpiece thickness (panel + pedestal) of 2.17" (55 mm).
-- Max. specific pressure of 100 PSI (7 kg/cm2), with a total laminating pressure of 250 metric tons (275 US tons).
-- Upper aluminum heating platen constructed with (2) levels of electrical resistance heating elements and channels for circulation of thermal oil for uniform heating.
-- Max. platen temperature is 302Ã‚Â° F (150Ã‚Â° C); platen surface is black anodized to maximize the radiant qualities of the platen.
-- Vacuum system with: High capacity accumulator tank for very rapid draw-down of the film over the shaped panels; patented system that automatically compensates for different foil thickness.Features & Operation:
-- Dual digital thermostatic controls on the main control panel;
-- (2) End loading, shuttle loading trays run on "THK" precision linear guides with automatic movement in & out of Press for continuous operation.
-- Special patented design moves the upper mobile press platen into the closed position and locks it in place with the use small HYDRAULIC press cylinders and low maintenance hydraulic power unit.
-- The concept of working without a membrane allows forming the film into deep & vertical sided profiles, very small profiles like vein lines, and lipped profiles that are not possible using a membrane.
-- Working without a membrane permits higher working temperatures required for laminating the environmentally preferred Polypropylene films and saves the expense of regularly replacing damaged/worn membranes.Supplied with a 4-section Vinyl roll dispenser.
Get email updates for Italpresse LOCK-FORM