2000 R B O SELECTA
Location:
Europe
Manufacturer:
R B O
Model:
SELECTA S

Specifications

Condition:
used
Year:
2000
Recnum:
MA-010743
Comments:
Motivated seller says, "Make a REASONABLE OFFER"!
Machtype:
AUTOMATIC VACUUM STACKER & UNSTACKER
Condition info:
(6-8) Very good condition [6]
Current status:
Active
Elect./voltage:
400/440 V, 50/60 Cy, 3 Ph.
Appr. repl. cost:
110000

Description

RBO "SELECTA S":(4) Stack Pre-Loading positions with powered Roller-Ways making it possible to change the stacks automatically. The Roller-Ways allow the operator to prepare the stack while the machine is working; at the end of the working cycle, the stack is introduced and automatically positioned into the machine; steel rollers pulled by a chain driven electric motor; variable Roller-Way conveyor speed from 49 - 246 FPM (15 - 75 MPM).; max. load capacity is 3,500 kG (7,700 Lbs).

-- Working dimensions:Panel length max. is 125.9" (3,200 mm) & min. is 11.8" (300 mm); width max. is 47.2" (1,200 mm) for single panels each side & 27.5" (700 mm) for (2) panels each side, min width each side is 6 + 6" (150 + 150 mm); thickness max. is 2' (50 mm) & min. is 0.47" (12 mm); weight max. is 220 LBS (100 KG.

-- Feeding patterns:Conveyor to feed panels lengthwise, with 15° left incline PVC coated rollers pulled by small belts driven by a variable speed motor; the number of panels to be fed is controlled by a counter.

-- Pickup System:Consists of: (2) Alloy bars, each one equipped with (22) suction cups (44 total cups). The (2) rows of vacuum cups are driven by a 40 M3/Hr Vacuum Pump and are automatically adjustable in the width from the control box.(1) Vacuum Cup Frame consists of: Bridge structure with double-beam frame of tubular steel. Carriage travels horizontally by means of inverter and tooth belt; vertical travel of the column, which holds the Pickup System by means of inverter and flat belt. Both movements are driven by a synchronous 3-phase motor.

-- Optimization device:Pickup System range according to the stack height is automatic; control of the horizontal carriage position is made by an encoder. No adjustment is needed in case of panel dimension change.

-- Control:Separate control board with Programmable Logic Controller (PLC is an OMRON "NT20S" model), which controls the machine working cycle. The control board is equipped with a touch screen keypad to change the working parameters according to the panel dimensions.The keypad gives the possibility to input all necessary data for the machine working and to receive messages for the operator, diagnostic messages, alarms, and/or instructions, or to modify the working parameters directly, all simultaneously.The keyboard is a graphic terminal with (12) function keys & visualizes pages for the definition of messages and numerical data. All information visualized on the keyboard can be translated in all major languages and is supported by graphics or symbols.

-- Technical Data:Speed max. is (4 - 5) cycles/Min; compressed air is 5 - 10 NL/Min; installed power is 12 HP (9 kW); stack height max. is 59" (1,500 mm) at 9/8" (250 mm) Roller-Way height; Roller-Way height adjustment from 9.8" - 11.8" ( 250 - 300 mm); automatic stack change unit with a powered rollerway inside enables the feeding of a new stack, a powered rollerway inside enables the unloading of stack;

-- Complete with:(2) Automatic open