Top Seller
11" Swing 18" Centers Sharp
Location:
Harrison, NJ
Price:
$34,800 USD
Manufacturer:
Hardinge lathes
Model:
1118H Hardinge HLV-H Copy
Distance between Centers:
18"
Spindle Nose:
5C (10°)

Specifications

Condition:
new
Stock number:
136934
Age info:
NEW
Main motor:
5 hp
Sharp model:
1118H PRECISION LATHE
Swing over bed:
11"
Feed motor (dc):
75 watt, 110 volt
Weight (approx):
2,300 lbs
With jaw chucks:
5"
With step chucks:
1 1/16-6"
Inch threads (36):
11-108
Coolant pump motor:
0.25 hp
Cross slide travel:
6"
Metric threads (36):
0.275 - 2.7
Swing over carriage:
9"
Compound slide travel:
3"
With expanding chucks:
3"
With round 5c collets:
1 1/16"
Swing over cross slide:
6"
With square 5c collets:
3/4"
Tailstock spindle taper:
MT #2
With hexagon 5c collets:
7/8"
Distance between centers:
18"
Tailstock spindle travel:
3.75"
Carriage power feed range:
5/16-7"
Leadscrew pitch, diameter:
8 tpi, 1"
Tailstock spindle diameter:
1.358"
Spindle nose taper (inside):
5C (10°)
Cross slide power feed range:
4/16-4"
Spindle nose taper (outside):
Quick-action compound slide travel:
0.1"
Subcategory:
Toolroom machines

Description

SHARP MODEL: 1118H PRECISION LATHE
EQUIPPED WITH DIGITAL VARIABLE SPEED (DVS) HEADSTOCK
w/NEW FEATURE - PRESET DVS HI-LOW RATIO
CAPACITY
Swing over bed........................... 11"
Swing over carriage...................... 9"
Swing over cross slide................... 6"
Distance between centers................. 18"
SPINDLE
With round 5C collets.................... 1 1/16"
With hexagon 5C collets.................. 7/8"
With square 5C collets................... 3/4"
With expanding chucks.................... 3"
With step chucks......................... 1 1/16-6"
With jaw chucks.......................... 5"
Spindle speed range (inf. variable DVS): 130-4,000 rpm
Spindle nose taper (inside): 5C (10°)
Spindle nose taper (outside): 4°
TRAVEL AND FEED RANGE
Cross slide travel...................... 6"
Compound slide travel................... 3"
Quick-action compound slide travel...... 0.1"
Carriage power feed range............... 5/16-7"
Cross slide power feed range............ 4/16-4"
THEADING
Leadscrew pitch, diameter............... 8 tpi, 1"
Inch threads (36)....................... 11-108
Metric threads (36)..................... 0.275 - 2.7
TAILSTOCK
Tailstock spindle diameter.............. 1.358"
Tailstock spindle taper................. MT #2
Tailstock spindle travel................ 3.75"
GENERAL
Main motor.............................. 5 hp
Coolant pump motor...................... 0.25 hp
Feed motor (DC)......................... 75 watt, 110 volt
Weight (approx)......................... 2,300 lbs
FEATURES:
Digital Variable Speed (DVS) - Super quiet and vibration
free!
High-speed spindle (infinitely variable 130-4,000 rpm),
accuracy within 50 millionths TIR
Hardened and ground spindle
Independent electric feed control on carriage and cross slide
Quick-change inch/metric gearbox with 36 changes
Double angular contact bearings support spindle
Quick-action compound slide for threading
Hardened and ground bed ways; turcite coating on carriage
and bed
Adjustable thread length control stops with fine adjustment
Hardened and ground leadscrews
STANDARD EQUIPMENT:
- SPLASH GUARD
- COOLANT SYSTEM
- HALOGEN WORK LIGHT
- 5C-COLLET CLOSER AND COLLET HOLDER
* WIRED 220V, SINGLE PHASE or 3 PHASE
(440V REQUIRES OPTIONAL TRANSFORMER)
THE FOLLOWING OPTIONAL ACCESSORIES ARE AVAILABLE AT
ADDITIONAL COST - CALL FOR PRICING:
- 4-JAW 6" CHUCK WITH 6" FIXTURE PLATE
- 7" FACE PLATE
- QUICK CHANGE TOOL HOLDER SET (KDK)
- Q.C.T.H. (ALORIS)
- VERTICAL CUT-OFF SLIDE
- TAPER ATTACHMENT
- STEADY REST
- FOLLOW REST
- LIVE CENTER -ROYAL (DUAL BEARING) MT#2
- LIVE CENTER - MT #2
- DRILL CHUCK - JACOBS WITH ARBOR (0-1/2") MT#2
- 440V TRANSFORMER - 5 HP