1998 FRIZ MFP-14/27 MEMBRANE PRESS

1998 FRIZ MFP-14/27 MEMBRANE PRESS [PM-010385] in Canada

Location:
Canada
Price:
$79,500 USD
Manufacturer:
Friz
Model:
MFP-14/27

Specifications

Condition:
used
Year:
1998
Recnum:
PM-010385
Comments:
Low usage, well maintained FRIZ "MFP" Membrane Press w/Roll Unwind Station!
Machtype:
MEMBRANE PRESS
Condition info:
(6-8) Very good condition [7]
Current status:
Under Contract
Elect./voltage:
600 V, 60 Cy, 3 Ph.
Appr. repl. cost:
260000

Description

FRIZ "MFP" Membrane Press with shuttle loading from one side and 8-Roll Laminate Unwind Paternoster:

-- Platen dimensions of 1,400 mm (55.1") x 2,700 mm (106.2") with a useful pressing cap. 1,100 mm (43.3") x 2,400 mm (94.4"); 19-1/2" (500 mm) opening, chamber height for a max. material thickness of 3-1/8" (80 mm), max. specific chamber pressure of (5) bar or 80 PSI on ea. platen.Specifications:

-- Actual size of heating platens 106" x 55" (2,700 x 1,400 mm), upper platen unit with electric resistance heating of 24 kW, lower platen with electric resistance heating, heating range up to 240° C; lower vacuum table with large cap. vacuum pump allows processing of concave surfaces.

-- (6) Large dia. down stroke hydraulic cylinders with 500 mm (19-1/2") stroke.Equipped & Complete with:

-- Double-roll manual material holders for single-sided operation load, press and return for unload; manual loading-and-unloading shuttle tray allow for low/medium volume operation.

-- Complete with: Hot air recycler for the compressed air used in pressure chamber and 15 HP hydraulic pump unit.Additionally includes:

-- 8-Roll Capacity Foil Paternoster "TPL 2-8" for storing & unwinding of foil rolls; accepts 1,500 mm (59") rolls. The unit is equipped with motorized chain drive, chain protection, lateral coverings, & protective grating.

-- Motorized Foil Feed & Cross Cutting station mounted to Laminate/Foil Roll Paternoster. Features motorized foil transport and automatic length cut-off.Operation & Operator Interface:

-- Use of a User-Friendly PLC "HOMATIC NC 16" control ensures the possibility to set & memorize variable operation parameters like time, pressure, vacuum & temperature.

-- The PLC control also provides for a MODE-2 cycle that allows the press to work without a membrane. This will allow working with veneers, no female moulds, evened out dimensinal tolerances, shorter pressing time, lower energy requirement & a higer degree of effiency.

-- Dims: Overall length 9,140 mm (360") x 3,110 mm (122.4") overall width & 2,700 mm (106.3"), approx. weight 11,000 kG (24,000 Lbs).