no-image_en.png
Location:
Rhaunen, Germany
Price:
No price
Model:
Ferti-SPACE FS6511/1

Specifications

Condition:
new
Year:
2014
Rolls:
381 rpm
Tyres:
750/45R26.5
Chassis:
Tandem chassis
> hydro-tandem:
hydraulic suspension (DW) of axles (type Tridem)
Machine designation:
13732-15297
Height of the spreader:
1,500 mm
Blocking (dw) (attention:
the trailing axle must be

Description

Stall spreader Ferti-Space
FS6511 / 18BU German version
Standard equipment
> Self - supporting barn spreader with 2 vertical
Milling rollers 1,080 mm
> Steel box with high elasticity limit (HLE 550)
+ Top chest
> Through sweat seams on the box
> Exterior access ladder
> Frontal protection grille with grille window
> Standardized series production
> 4 ship chains 14 mm (class 80)
> Flow regulator with pressure compensation
> Reversal of the transport floor by replacing the hydraulic-
Connections on the front of the machine (direct connection)
> 2 vertical spiral - shaped curved milling rollers 219 mm with
Elastic coupling
> PTO drive 1,000 rpm - speed of rotation of the
Rolls: 381 rpm
> Compressed air brakes
> Screwed rigid eyelet Rockinger 40 mm
> Dyke spring suspension by means of parabolic transverse leaf springs
> Hydraulic skid with direct connection to tractor (DW)
> Walterscheid wide-angle articulated shaft with cam lock
> Tail lights installed in the holder
> Tires 400R22.5 cover
> Steel blasting before painting
> Basic finish from ester epoxy (2K) + final finish (2K)
(A total of 100)
> Fast drying (60)
> Bolt-on and galvanized mudguards
Specific equipment of all models
* Detachable spreader with 4 turns
* Height of the spreader: 1,500 mm
* Removable steel tines (400 HB) (80x12 mm)
* Elastic coupling between the housings and the milling rollers
* Folding blades 1,140 mm (Specific equipment
For FS5511, FS6011 and FS6511)
* Joskin-Boggie roll-over with bolted table
* Parabolic leaf springs of 1,350 mm for the model FS5511 / 15BU
* Parabolic leaf springs of 1,600 mm for models FS6011 / 17BU
And FS6511 / 18BU
* Rear axle with 2 shock absorbers and hydraulic
Blocking (DW) (Attention: the trailing axle must be
Over 15 km / h may be blocked)
> Wheels 750 / 45R26.5 (Alliance) 170 E TL 1 380 (1350 x 750 mm,
6610/8700 kg per wheel at 40 km / h) instead of 400R.22.5
> Wheels 750 / 45R26.5 (Alliance) 170 E TL 1 380 (1350 x 750 mm,
6610/8700 kg per wheel at 40 km / h) instead of 400R.22.5
> For hydro-tandem and hydro-tridem axle spacing 1,820 mm
Instead of 1,550 mm
> ALB (Automatic load - dependent brake valve on two - axle with
Hydro-tandem
> Hydro-Tandem: hydraulic suspension (DW) of axles (type Tridem)
Instead of the axle assembly
> Thermoplastic mats for Fert-Space and Ferti-CAP
> Joskin ballhead instead of Rockinger (large plate)
> Attachments 250 mm Alu FS6511 / 18BU
> Electrical operation of the transport floor with flow-
Regulators, switches for switching the transport floor on and off
And directional changer for the transport floor (button) - advance-
Dosing slider opening indication - including
Operating box Ferti-Control 630
> Joskin ball head 4 T instead of 3 T (large plate) (accessory 378 or
2269 required)
> Horizontal milling rollers with straightener, with: hood with hydraulic
Opening, cam locking on each plate and each milling drum
(Operating box F-C 630 or 730 required)