- Sterling, MA, USA
- No price
- Edwards vacuum pumps
--Large capacity BOC Edwards GV600F Drystar dry mechanical pump.
--Aerzen GLB.15.11 HV-07 roots blower.
--Please see attached documentation.
The design of the Edwards GV dry pumps is based on the well-proven claw technology for dry pumps. Two pairs of claw shaped rotors on two shafts rotate in opposite directions to trap and compress the process gas which flows along the axis of the shafts between the claw pairs.
During each complete rotation of the claws, first the inlet port of each claw pair is exposed (to admit gas to the pump), then both the inlet and outlet are isolated (to trap and compress the gas), and then the outlet is exposed (to expel the compressed gas). The claw mechanism offers the following features:
•Dry operation, non contact mechanism
•Self valving - the pump can deliver to atmospheric pressure
•Short gas path - better particulate handling
•Staged compression - efficient power use
•High process temperature - excellent water vapor handling
Low vacuum bearings (at the exhaust stage of the pump) are protected from the process stream by a unique gas-purged shaft-seal. Compressed air is fed to the shaft seals which prevents the ingress of process contaminants, including gases, vapors and particulates.
Low cost of ownership
GV pumps can offer real cost of ownership savings. The GV pumps are robust and reliable, delivering a reduction in process downtime which would lead to lost production. In addition, the minimized cost of routine maintenance (such as oil and filter replacement, spares inventory holding and oil disposal) all adds to the savings using GV dry pumps. With service intervals of 18 months for re-greased bearings and 3 years for bearing changes, the GV pumps offer a highly reliable and cost effective alternative to piston pumps.
The GV600 Drystar pumps have a displacement of (793m3hr-1)
Construction 3 Claw + 1 roots
Displacement (swept volume) 793 m3h-1 / 467 ft3min-1
Pumping speed * 560 m3h-1** / 330 ft3min-1**
Ultimate pressure Power consumption at 10mbar/ 7.5 Torr 7 Kw / 9 hp
Motor rating 22.5 Kw / 30 hp
Cooling water flow at 20°C 5.5 l min-1 / 1.43 gal min-1
Seal purge (dry air) Noise level 80 dB(A)
Inlet connection ISO100
Outlet connection ISO63
Weight 950 kg / 2100 lbs
Gear box oil capacity 1.6 liter / 0.42 gal
Electrical supply 380/415V 50 Hz 3 Ø
* Measured in accordance with Pneurop 6602 at 40°C
** GV600 @1 mbar
Edwards GV600 Drypump & Aerzen Blower Integration
Get email updates for Edwards GV600F