1999 BUSELLATO JET 6000 CNC
Location:
United States
Price:
$16,900 USD
Model:
JET 6000

Specifications

Condition:
used
Year:
1999
Recnum:
BP-012145
Comments:
Replace the control and you will have a very well maintaned productive CNC.
Machtype:
CNC MACHINING CENTER (W/ATC, "C" AXIS)
Condition info:
(1-5) As Is Condition [5]
Current status:
Active
Elect./voltage:
480/380 V, 60 Cy, 3 Ph
Appr. repl. cost:
245000

Description

Busellato JET 6000 CNC MACHINING CENTER (W/ATC, "C" AXIS)Operating field: X-Axis stroke is 5,400 mm (212.6"), Y-axis stroke is 1,833 mm (72.2"), and the large Z-axis stroke is 400 mm (15.7").

-- Positioning speed: on the X-axis is 377 FPM (115 MPM), 246 FPM (75 MPM) on the Y-axis, and 98 FPM (30 MPM) on Z-axis; Y-axis reach of vertical routers is 49.2"(1,250 mm).

-- Worktable: (8) Pneumatically locking panel supports, (32) matrix style vacuum cups (4 cups per support); (8) pneumatic backstops, jig locking device on (2) work areas.(4) 0-Points for (4) independent work zones; (4) Phenolic blade/panel supports for easy positioning of large panels.

-- Boring Unit: (1) "MP19" Boring head with: (19) Independently selectable vertical spindles for face boring, driven by a 4 HP motor; (9) of the spindles are in the Y-axis & (10) spindles are in the X-axis.(8) Horizontal boring units; (2 + 2) opposing spindles in X-axis for boring right & left sides, and (2 + 2) opposing spindles in Y-axis for edge boring front & rear of panel.

-- Machining: (1) 12 HP (7.5 kW) ATC Liquid cooled electro spindle router, ISO 30 adaptor; varilable speed from 0 - 18,000 RPM,(1) NC controlled "C" axis for 360° horizontal programming/processing from the control, (1) 8-position ATC automatic tool changer;router driven by 11 kW digital inverter with RH or LH rotation.

-- Operator & Machine Control: PC Front-end with: 15' Color monitor, modem & network card; "GENESIS" numerical control for (4) axes with programming & operation software, Windows operating system; continuously online software for real-time tool position & error messages.

-- Standard keyboard, RS 323 connection, CD ROM, floppy & hard disk drive systems for data management; all built into a protective cabinet enclosure,

-- Software features: Automatic G & M code, stop & restart, machine diagnostics, automatic optimization, and full graphic display of up to (11) parameters & programming of up to (2,000) work lines per single program; positioning of panel supports & vacuum cups.

-- Complete with; 100 cbm/Hr Vacuum Pump; man-height safety enclosure around rear & sides of machine; 2-zone safety mats (will stop machine if operator enters work area).

-- Actual Model is Busellato JET 6000 XL.

-- NOTE: Controller does not work and needs replacement.