- Görlitz, Germany
- SIPMA PS 1312 POWER CUT
Fixed chamber baler
SIPMA PS 1312 POWER CUT
The POWER CUT system in round bale presses enables the crushing of the crop before the pressing process. The feed, which is prepared with the round bale presses with a cutting unit, can absorb animals much better and it facilitates the comminution of the bales into the feed cart.
The electronic control panel signals whether the most important press parts work properly, determines the uniform filling of the chamber, automatically activates the winding process, displays the process which is currently running, solves the brakes of the winding device and thus facilitates the winding process as well as the number of bales produced.
The 11 cutting blades increase the bale density by approximately 15 - 20% and thus create ideal conditions for silage and increase the harvesting performance. Selected knives can easily be removed, which allows a rapid adjustment of the cutting length by changing the number of knives (cut material from a length of 10 cm). The cutting blades can be retracted hydraulically if you do not want to use the cutting unit.
The individual overload protection of the knives protects the cutting unit against stones or other foreign bodies, which can damage it (the knives are softened), and improves the longevity of the machine.
The system non-stop, which leads the Kettel and stretches (the Kettel does not stop during the bale loading), increases the machinendauernleben. The use of the reinforcement of the rope construction guarantees its longer work and allows the transmission the larger loads.
The uninterrupted chain guide and tensioning system (the chain does not stop when the bales are unloaded) increases the life of the machine. The reinforced chain construction ensures longer operation and can promote greater loads.
The synchronized mechanical locking device simultaneously closes both chamber locks and increases the compression density.
The integrated net and twisting device allows the selection of an optimal harvesting technology for the respective material and winds it with net, single cord or double cord with infinitely variable winding adjustment.
A leading and crushing rotating set significantly increases the ability to transport the material, protects the machine from clogging, and improves its efficiency.
The wide-angle shaft, which is secured by an automatic clutch, improves the working comfort, makes it possible to travel in tight curves without the machine being switched off, and increases the life of the machine and the productivity of the work.
Automatic bale wrapping with the planned number of wrapping.
Automatic lubrication 1249 Euro net
Transport on request
Get email updates for Sipma SIPMA PS 1312 POWER CUT