Top Seller
Cosen C-300NC SNC Series AUTOMATIC
Location:
Perth, Australia
Manufacturer:
Cosen saws
Model:
C-300NC
Motor:
0.1
Weight:
1600 / 1800

Specifications

Condition:
new
Sku:
Cosen001
Division:
metal
Piece (mm):
50
Multiple (mm):
6500
Coolant tank (l):
45
Floor space (mm):
1890 x 1905
Vise control (l):
Hydraulic
Hydraulic tank (l):
25
Saw blade; tension:
Hydraulic (Automatic blade breakage detection)
Capacity; round (mm):
300
Capacity; square (mm):
300
Net/gross weight (kg):
1600 / 1800
Height of work bed (mm):
660
Saw blade; speed (m/min):
20 - 100
Capacity; rectangular (mm):
340 x 300
Motor output; coolant (kw):
0.1
Bundle capacity; width (mm):
190 - 300
Bundle capacity; height (mm):
70 - 140
Motor output; hydraulic (kw):
0.75
Motor output; saw blade (kw):
3.75
Saw blade; size l x w x t (mm):
3505 x 34 x 1.1
Automatic indexing length; single (mm):
403
Subcategory:
Bandsaw
Subcategory 2:
Automatic
Subcategory 3:
Metal work

Description

Features include:
Split Front Vice - The vice holds the work piece on both sides of the saw blade
Idle Wheel Motion Detector - The detector will sense any blade slippage or breakage through the idle wheel motion
Full Stoke Cylinder Vice - The font and rear vices are driven by full stoke cylinders. Integrating with the SNC20, apply excellent performance
Hydraulic Chip Conveyor
Dual Valve Design - The machine is easy to set the feed rate and pre-selective cutting pressure for different materials, allowing you to achieve optimum cutting performance
Quick Approach - Work height sensor and quick approach rod will position the saw frame to safe clearance. This will eliminate the idle time for feeding and blade dropping to the small clearance off work piece.
Hydraulic blade tension - Automatic hydraulic tension device will supply tension to the blade when machine is turned on and will release the tension when the machine is switched off.
Grooved Carbide Guide & Extra Bearings - These are two extra bearings located on a central axis, which support the blade from the top, giving it extra penetrating force. Eliminating the stress by pre-aligning the blade before it enters the grooved carbide.