- Spindle nose:
- Swing in gap (mm):
- Inch threads (tpi):
- Metric threads (mm):
- Module threads (dp):
- Spindle speed (rpm):
- Swing over bed (mm):
- Sleeve diametre (mm):
- Lead screw pitch (mm):
- Main drive motor (kw):
- Morse taper of sleeve:
- Coolant pump motor (w):
- Rapid travel motor (w):
- Taper of spindle centre:
- Lead screw diametre (mm):
- Max. top slide travel (mm):
- Spindle bore diametre (mm):
- Swing over cross slide (mm):
- Max. cross slide travel (mm):
- Max. length of work piece (mm):
- 1000, 1500, 2000
- Max. travelling of sleeve (mm):
- Optional main drive motor (kw):
- Range of transverse feed (mm/rev):
- Max. output torque of spindle (n.m):
- Range of longitudinal feed (mm/rev):
- Longitudinal rapid travelling speed (m/min):
- Transversall rapid travelling speed (m/min):
- Lathes in Australia
- Metal work
High rigidity spindle system, with absolute temperature rising no higher than 35 degrees C.
The headstock, gear-box, apron and bed-ways are made of high quality cast iron, and are all cast with the resin sand foundry technology. The bed ways are induction-hardened, with hardness around HRC 55.
The spindle supported by 3-pointed high-precision bearings and all gears in headstock are precisely grinded, the spindle turns smoothly at high speed.
Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears.
When rapid feeding is on, the tool slide longitudinal travel handwheel will be automatically disfunctioned.
Reliable safety devices such as footbrake and emergency power-off switch are assembled. Adjustable overload protection device is also installed in the feed system.
The tool post adopts the structure of ratchet pawl, and can be relocked by turning the lever for just half a lap.
Tailstock are equipped with double-locked mechanism, smooth and effortless movement is ensured by the elastic scroll devices underneath.
With capacity of swing over bed 660mm, swing in gap 830mm, distance between centers 1000 – 5000mm, this lathe covers wide range of working pieces.
Steady rest, follow rest, 3-jaw chuck, 4-jaw chuck, face plate, drive plate, thread chasing dial, live center, center, foot brake, full set illumination system, full set coolant system, full set wrenches and screw drivers.
Taper turning attachment, Quick change tool post, DRO, CE configuration
Get email updates for Romac CY6250L