- Görlitz, Germany
- $4,084 USD
- SIPMA OS 7510 KLARA
Round bale wrapping machine
SIPMA OS 7510 KLARA
Self-loaded bale wrapper SIPMA OS 7510 KLARA is attached to the three-point hydraulics of the tractor, in addition it has the support wheels. It is equipped with the loading device which loads the bellow wrapped from the rear. The winding process can be carried out during transportation to the next barking or storage location. The bale wrapper is equipped with the universal and modern feeding device for the film width of 0.5 and 0.75 m as well as with the device for gripping and cutting the film, so that the user is only required to engage the new film roll. The control takes place from the tractor cabin through the hydroseparator.
The construction is connected to the three-point hydraulics of the tractor and offers high mobility of the winding machine and a low labor cost, since the device is only operated by one person.
The self-steering spigot wheels (piano type) in connection with mounting the machine at the three-point hydraulics of the tractor offer a high maneuverability and tractor relief of the group from the tractor and roundball winder.
Drawbar (additional accessory) allows the aggregation of the round bale wrapper by the transport catch from the tractor.
Foil container (additional accessories) allows the film to be captured and cut during the bad weather.
Hydraulic table locking system (additional accessory) prevents the table from rotating when riding with unevenness.
The tipping table allows unloading of the wrapped bale and protects it against mechanical damage. After unlocking the lock, the frame of the winding device is lifted with a hydraulic lift of the tractor and the bobbins are rolled backwards.
Solid frame is made of bent and welded profiles, which causes the whole construction to be stable and overload resistant.
The universal film feeding device, which is used in the winding machines of SIPMA S.A. Is used with film widths of 0.5 and 0.75 m. The 0.75 m wide film for bale wrapping requires only 16 table revolutions and significantly reduces the winding time. The feeder spares the foil in the bale roll time, assuring the tight and accurate packing of the bale.
The tapered aluminum rollers in the film feed device ensure a pretension and adhesion of the film during the winding process.
The ball counter shows the current number of bales wrapped with the foil and informs about the end of the bale wrapping cycle. The type of wrapping of the loaded bale is based on the fact that the additional film layers with 50% overlap follow 50%, which ensures correct storage and effective silage of the green fodder.
Drawbar d = 40mm 599 Euro net
Drawbar d = 50mm 699 Euro net
Foil holder 299 Euro net
Hydraulic table locking system 599 Euro net
Transport on request
Get email updates for Sipma OS 7510 KLARA