- Bergisch Gladbach, Germany
- Sipma OS 7531 Maja
Round bale wrapping machine
SIPMA OS 7531 MAJA
The round bale wrapper with the baler SIPMA OS 7531 MAJA is a fully automated self-loading machine attached to a tractor. Full automation of the entire process is ensured by the advanced control system with the possibility of prior programming of the operating parameters.
Thanks to the technological system "front-rear" the winding device can work in the same direction as the press (the field along). This ensures fast bale loading and high working efficiency. The bale is wrapped with foil as the vehicle travels to the next bale. Thanks to this system, the winding device is coupled to the press, whereby the winding and wrapping of the bales can take place parallel in a working journey.
The adjustable drawbar allows an effective collection of bales and the transport of the machine on access roads (also public) in the working and transport position.
The universal film feeder operates with film widths of 0.5 and 0.75 m.
The tapered aluminum rollers in the film feeder ensure a pretensioning of the film as well as its tightness and adhesion during the winding process.
The hydraulic holding and cutting device automatically switches on each time the bale is wrapped with foil, which significantly speeds up the winding process and increases its efficiency.
Thanks to the wide range of dampening and peat areas.
The baler allows the bales to be placed on the ground or their rolling away on the tread on the field and protects the wrapped bale against damage during unloading.
Possibilities of the onboard computer:
Manual, automatic or semi-automatic operation of the winding device,
Continuous observation of the winding process,
Measurement of the number of wrapped bales,
Measurement of the operating time [h] with the accuracy of 1 minute,
Measurement of the efficiency achieved (bales / h),
Measurement of work parameters on three independent fields - gives the possibility to calculate the number of wrapped bales, working time, efficiency on three different fields separately,
Programming of the wrapping number (depending on the width of the film), then an automatic transition to the next working phase,
Automatic adjustment of the machine for transport,
Status display of the reed sensors (evaluation of the efficiency or malfunction of the sensors) - eliminates the deficiencies by replacing the defective sensor without having to order the service,
Displays the total number of wrapped bales after installing the on-board computer on the reel.
Transport on request
Get email updates for Sipma OS 7531 Maja