- Görlitz, Germany
- $5,849 (USD)
- SIPMA KD 2400 PRERIA, SIPMA KD 2410 PRERIA
- Working width:
- 2.40 m
- Tractor mounted:
- Mounted mower
- Agriculture equipment in Germany
- Subcategory 2:
SIPMA KD 2400 PRERIA 4999 Euro net
SIPMA KD 2410 PRERIA 6599 Euro net
The mower mowers with a bottom drive are used for mowing all green fodder plants for direct feeding, for hay or for silage.
The bottom drive type of the mower ensures a uniform spreading of the swath so that the grass can be dried evenly and can be picked up directly by a round baler (shaking and raking are not necessary).
Six rotating discs with a speed of 3100 revolutions per minute ensure high mowing quality and performance (compared to mowing machines with top drive) of up to 2.5 ha / hour.
If an obstacle is approached, the elastomeric safety devices ensure that the cutting bar can deflect backwards, thus avoiding damage to the machine.
The control system ensures a corresponding inclination and the height of the mowing in the range of 30 - 80 mm by means of a fastening strand of the upper point of the frame and the three-point hydraulics of the tractor, which enormously influences the re-growth of the grass.
The SIPMA telescopic articulated shaft with set-up clutch ensures a smooth stop of the rotating elements of the machine and protects the drives of the floppy disk drives from damage.
The hydraulic cylinder supplied by the external tractor hydraulic system allows you to lift the cutting unit into the transport position, which makes the work easier and increases the working comfort.
The spreader bars mounted behind the cutterbar are used to adjust the width of the swath in the range of 60 - 90% of the working width of the mower and adapt the swath to the equipment used later during the harvest.
The cultivator of the swaths allows the arrangement of a light swath, which reduces the drying time of the green feeder by 20 - 30%.
The effective, V-shaped mallets of the rake of the swath are made of plastic and reduce the maximum crop loss. The settings of the concave (working slot: 3 front and 2 rear) yield a combination of 6 buckling stages of the mown crop.
The looped gears reduce noise and ensure long and trouble-free operation.
KD 2400 PRERIA KD 2410 PRERIA
Length mm 4400 4400
Width mm 1600 1830
Height mm 900 900
Weight kg 480 690
Width of mowing m 2,4 2,4
Height of mowing
Minimum mm 30 30
Maximum mm 80 80
Number of plates piece 6 6
Number of cutting blades 12 12
Maximum speed km / h ≤ 15 ≤ 15
Power requirement kW (HP) 30 (42) 40 (55)
Transport on request
Get email updates for Sipma SIPMA KD 2400 PRERIA, SIPMA KD 2410 PRERIA