Top Seller
Fluke 190-502/AM/S in United States
Location:
United States
Price:
$5,799 USD
Model:
190-502/AM/S

Specifications

Condition:
used
Display:
153 mm full color LCD with LED backlight
Division:
Test and Measurement
Bandwidth:
500.0 MHz
Rise time:
0.7 ns
Resolution:
200 µs ~ 4.8 s
Bandwidth 2:
500 MHz
Bandwidth 3:
20 MHz or 20 kHz
Launch date:
Nov-2012
Sample rate:
5.00 GSa/sec
Measurements:
DCV, ACV, Resistance, Continuity, Diode, DCA, ACA, Capacitance, Temperature
Memory depth:
30,000 data points
Display count:
5000
Sample rate 2:
125 MS/s
Glitch capture:
8 ns
Timebase range:
1 ns - 4 s/div
Input impedance:
1 MΩ ± 1%, 14 pF ± 2 pF
Time base range:
5 ms/div ~ 2 min/div
Input sensitivity:
2 mV - 100 V/div
Recorded timespan:
6 s ~ 48 hr
Maximum resolution:
5000 counts
Number of channels:
2
Vertical resolution:
8 bit
Real-time sample rate:
5 GS/s (single channel) or 2.5 GS/s (on 2ch)
Subcategory:
Handheld
Subcategory 2:
Oscilloscopes

Description

Fluke 190-502/AM/S Color ScopeMeter, 500 MHz, 2 channels, DMM, SCC-Kit
As the first two- and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the new Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 60 MHz, 100MHz, 200MHz, or 500 MHz bandwidth models, with real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. The models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail. And the scopes are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.
The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes, and hands free operation with Connect-and-View™ triggering.
Two or four electrically isolated inputs
CAT III 1000V / CAT IV 600V safety rated
Choose from 60MHz, 100MHz, 200MHz, or 500 MHz bandwidth models
Single shot, pulse width, and video triggering
Fast sampling rate, up to 5GS/s with up to 200 ps resolution
Deep memory: 10,000 samples per channel waveform capture so you can zoom in to the details
Dedicated 5000 Count digital multimeter in 2 Channel models
Quad meter measurements via scope BNC inputs in 4 channel models
Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
ScopeRecord roll mode, capture waveform sample data for up to 48 hours
TrendPlot, trend measurement readings for up to 22 days
Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
IP-51 rated for dust and drip proof to withstand harsh environments
Isolated USB ports for memory devices and PC connectivity
Li-Ion battery for extended operating timespan
Easy-access battery door to make it easy to swap batteries
A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock
190-502
specifications:
Oscilloscope
Bandwidth: 500 MHz
Number of channels: 2
Rise time: 0.7 ns
Input sensitivity: 2 mV - 100 V/div
Vertical resolution: 8 bit
Input impedance: 1 MΩ ± 1%, 14 pF ± 2 pF
Real-time sample rate: 5 GS/s (single channel) or 2.5 GS/s (on 2ch)
Maximum record length: 10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecord™ Roll mode
Timebase range: 1 ns - 4 s/div
Glitch capture: 8 ns
Trigger types: Connect-and-View™, Free Run, Single Shot, Edge, Delay, Video, Selectable pulse width and External, dual slope trigger and Event trigger (n-cycle)
Scope measurements: Cursor: 7, Automatic: 30
Acquisition modes: Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture