Emlichheim, Germany
$2,732 USD
Schredder BX-42RS Häcksler Holzhäcksler Holzschredder Traktorschredder


Machine designation:
Agriculture equipment in Germany


Thanks to its hydraulic intake, working with the BX-42RS is a real pleasure. There is no pushing, pushing, etc. on this model; Do the 2 large feed rollers alone. The speed of the feed rollers can be varied continuously. This is important in order to adjust the feed speed to the diameter of the shredded material. Smaller diameters can be fed in more quickly than larger diameters. If, however, the pull-in is blocked, the pull-back mechanism can be moved into the backward mode via the large bail on the funnel. Furthermore, the pull-in can also be switched off via this bracket. Supply takes place via the tractor hydraulics; A pressure advance and a pressureless return or a double-acting control unit are required. The BX-42 RS is the latest version of the BX shredder, which has a double-sided suspension of the feed rollers and a reinforced intake funnel. The wood chopper is delivered complete with PTO shaft. In the PTO shaft, a shear pin is installed on one side which, for safety reasons, serves as a break point in the event of blockages or overloads. This means that even larger tractors with more than 100 hp can be used without difficulty. You should have at least 30 hp of engine power. The PTO speed must be 540 - 1000 revs. be. The hopper has an opening of 51 x 51 cm at the top; In the lower area the opening has a dimension of 10.2 x 25.4 cm. A maximum diameter of 10 cm can be shredded. Many competitors specify the maximum shredder diameter equal to the dimensions of the lower fill opening, but this is unrealistic and can trigger the safety mechanism in the PTO shaft. Softer woods can be shredded with a width of up to 15 cm. Such diameters being generally processed into firewood and not chopped. The processing of the BX-42RS is very solid; The thicknesses of the sheets used are 10 and 5 mm in the load bearing area, 2 mm in the funnels and non-load bearing parts. For transport, the hopper can be easily folded up and secured by means of a splinter. The machine is very easy to maintain; The complete flywheel cover can be opened by loosening only one screw and has access to the 4 cutting knives. These blades have double-sided blades so that they can be easily turned if necessary. The flywheel has a weight of 50 kg and has mounted wings, which produce the very strong pull through which ultimately the shredded material is blown out by the ejection funnel. Due to this very strong draft, clogging of the shredder is nearly impossible. The ejection hopper has a height of 152 cm plus the lifting of the lower link and can be rotated 360 degrees. This makes it easy to fill the shredded material even on higher trailers or directly in big bags. The ejection angle can also be changed. The BX-42RS hurls the shredding material up to 6 meters! The shredder is designed for the 3-point suspension and can be used from cat. Compare our products with competitive products! They will not find anything comparable. We not only developed th