The wood chopper Scorpion 250 RG / 90 crushes tree trunks and branches with a high green content up to a diameter of 250 mm.
Scorpion 250 RG / 90 is a disc chopper with a pneumatic system for ejecting wood chips on the disc. The hacker is attached to a single axle. The wood chopper is designed for working with tractors over 100 hp. The cutting group consists of the disc with the screwed ground ground cutters. The drive is transmitted via the power take-off shaft of the tractor at 540 or 1000 rpm. The hydraulically driven intake consists of a built-in steel chain and a pressure roller. This solution allows for easier loading of the wood, which optimizes the work of the operator and increases the performance. Innovative solution to the lateral position of the intake opening allows simultaneous transport of the wood chopper and trailer with the tractor. The wood chopper is on a single axle chassis for safe driving in difficult terrain. The construction of the hacker allows loading with the crane.
Innovative solution to the lateral position of the intake opening allows simultaneous transport of the wood chopper and trailer with the tractor.
In the standard, the wood chipper is equipped with an electronic control system No-Stress, which automatically prevents overloading of the drive system by instantaneous stopping of the pull-in.
Dimensions (LxWxH) 3000 x 2350 (3150 Dimensions at work) x 2680 [mm]
Weight 1900 without crane [kg]
Feed up to max. 250 Diameter [mm]
Number of knives 2 or 3 cutting and 2 counters
Feed speed up to 42 [m / min]
Hour power up to 18 [m3 / h]
Cutting length 9 or 14 [mm]
Type of feed of hydraulic feeder
Diameter of the disc 800 [mm]
Feed opening [WxH] 420 x 255 [mm]
Drive via the PTO shaft
Power of the tractor 100 [PS]
Outlet 360 ° rotatable, height-adjustable
- PTO shaft
-Other hydraulic system
Get email updates for Teknamotor Holzhacker Skorpion 250 RG/90