2014 京城重工 QY8D in China
Location:
China
Manufacturer:
Capacity cranes
Model:
京城重工 QY8D
Capacity:
17,637 lbs

Specifications

Condition:
new
Year:
2014
Country:
China
Division:
Construction Equipment
Main arm:
number of sections 3
Attachments:
QY8D crane is in the original north QY8G based on the upgrading of the development. On the basis of continuing to maintain the leading domestic technical indicators and excellent reliability, but also in the stability of the product and product appearance characteristics of the improvement has been further improved. The maximum lifting capacity of 8000kg, the maximum lifting torque of 245kN • m, the boom with hexagonal cross-section, full shrinkage of 7.76 meters, full extension of 18.82 meters, the length of 6.5 meters. Before and after the legs are H-type, with a larger leg span. Using Dongfeng Special Purpose Vehicle Company production chassis, selection of Yuchai common rail EFI Euro Ⅲ diesel engine. All cylinders use imported seals, hoisting mechanism by the planetary gear deceleration structure and the use of German technology, high-speed plunger motor, casting folding rope groove drum composition, which can effectively prevent the occurrence of ropes. Rotary mechanism using planetary rotary reducer, with controllable sliding and lifting automatic centering function. Truss-type turntable, rear-mounted variable hinge point and the new curved sliding door in the form of the use of the control room, so that products with high performance, high reliability on the basis of the appearance of more beautiful shape.
Gross weight:
23,104 lbs
Extra options:
New/unused
Maximum lift capacity:
17,637 lbs
Hydraulic oil tank capacity:
about 145L

Description

The maximum rated weight 8000kg
The maximum speed of 85km / h
Climbing capacity of 28º
Weight Total vehicle mass 10480kg
Front axle carrying capacity 2800kg
Rear axle carrying capacity of 7680kg
Minimum turning radius of 7500mm
Main arm: number of sections 3
Full arm length 7800mm
Full arm length 18860mm
Extend the speed of the whole extension arm 45s
Variable speed 2º ~ 78.5º / 30s
Vice arm side of the side of the arm. The arm has a single pulley.
Length 6500mm
Lifting mechanism Variable speed hoisting mechanism with grooved reel, driven by high speed plunger hydraulic motor through winch reducer. Using the power hook hook hook way. The lifting mechanism is equipped with a brake with a balancing valve.
Single rope tension 13.1 (1333kg) kN
Single rope speed 110m / min
Wire rope diameter 10mm length 120m
The leg has four hydraulic control legs, front and rear legs are H-type, can operate on each leg at the same time or separate operation. Each leg is fitted with a hydraulic lock.
Outrigger Span Horizontal 4250mm Longitudinal 3462mm
Chassis manufacturers Dongfeng Motor Company
Chassis Model EQ1100FLJ
Engine model YC4E140-30
Type inline, four-cylinder, pressurized, water-cooled
Displacement of 4.26L
Rated power 105kW / 2500r / min
Maximum torque 500N · m / ≤ 1600r / min
The transmission has 5 forward gears and 1 reverse gear
Rotary device hydraulic system
The hydraulic pump is driven by the engine via P.T.O.
Hydraulic oil tank capacity: about 145L
Oil filter oil return filter