- Johor, Malaysia
- $11,485 (USD)
- CF 40
- Woodworking equipment in Malaysia
HELMA DOUBLE SPINDLE COPYING SHAPER C/W RETURN CONVEYOR
The CF 40 Copying Shaper is fitted with 2 independently controlled spindles which can take straight cutter blocks as well as profile cutters. The blanks are inserted into prepared templates (single or double) and fed into the machine. The rubber covered feed rollers hold the workpieces firmly in the templates. Both are fed between the cutter spindles which move sideways as determined by the shape of the templates. The sealed roller bearing, which acts as a guide for the template is mounted underneath the cutter blocks on the spindle housing (not on the spindle itself) This bearing which is forced against the template controls the movement of the spindles with the cutter blocks. Both spindles rotate in the same direction as the workpiecefeed, to obtain smooth surfaces.
The spindles are free to move towards and away from each other. An air-cylinder ensures constant air pressure between the spindles whatever their distance will be. For straight moulding work the spindles may be locked.
Diameter of cutter spindles : 30mm
Speed of cutter spindles : 10500rpm
Max. cutting height : 100mm
Vertical adjustment of cutter blocks / profile cutters : 10mm
Max. distance between spindles, centre to centre : 450mm
Max. distance between feed rollers, centre to centre : 235mm
Motors for spindle drive : 2 x 5,5kw
Motors for feed drive : 0,37kw
Air consumption : Max. 20 l/min.
Feed speed, infinitely variable : 1, 8-10 M/min
Min. bending radius of curved workpieces : R = 300mm
Weight of machine, nett : 890kgs
Machine is in working condition with new paintwork and 3 months warranty from date of shipment. . This warranty does not covered for wear & tear parts and electrical parts.
Shipment of the parts for replacement will be on buyer account.
No warranty of electrical / electronic parts if failure due to low or surge in voltage and lightning surge
Get email updates for HELMA CF 40