Top Seller
1996 HARDINGE CONQUEST T42 CNC
Location:
Bethlehem, PA
Price:
$22,000 USD
Manufacturer:
Hardinge lathes
Model:
CONQUEST T42 CNC LATHE

Specifications

Condition:
used
Year:
1996
Serial number:
SG-919-B
Stock number:
CK-20091
Size:
1-5/8"
Weight:
9,800 LBS
Standard:
10 HP
Electrics:
230 VOLTS, 3 PH, 60 CYC
Dimensions:
93″ LR X 70 FB X 67” H
Center taper:
MT #3
Torque rating:
42 FT-LB
Travel maximum:
11.5″
Thrust / maximum:
700 LBS
Turning distance:
13.8″
Number of stations:
12
Maximum x-axis travel:
5.31″
Round shank tool size:
1-1/4″
Square shank tool size:
3/4″
Speed range (1-rpm steps):
50 TO 5,000 RPM
Torque rating (continuous):
52 IN-LB
X-axis rapid traverse rate:
472 IPM
Z-axis rapid traverse rate:
630 IPM
Speed range (1-rpm steps) 2:
UP TO 4,000
Rapid traverse / return rate:
300 IPM
Spindle configuration (ansi):
A2-5″, 16 C
Preloaded ball screw diameter:
1.259″
Horsepower rating (at tool tip):
2.4 HP
Round collet (through capacity):
1.625″
Swing diameter over upper way cover:
21.2″
Subcategory:
Lathes cnc/nc

Description

SPECIFICATIONS
SPINDLE
SPINDLE CONFIGURATION (ANSI): A2-5″, 16 C
ROUND COLLET (THROUGH CAPACITY): 1.625″
HANG WEIGHT WITH WORK HOLDING DEVICE: 75 LBS
AC DIGITAL DRIVE SYSTEM
STANDARD: 10 HP
TORQUE RATING: 42 FT-LB
SPEED RANGE (1-RPM STEPS): 50 TO 5,000 RPM
CARRIAGE AND CROSS SLIDE
SWING DIAMETER OVER UPPER WAY COVER: 21.2″
PRELOADED BALL SCREW DIAMETER: 1.259″
MAXIMUM X-AXIS TRAVEL: 5.31″
X-AXIS RAPID TRAVERSE RATE: 472 IPM
Z-AXIS RAPID TRAVERSE RATE: 630 IPM
MAXIMUM Z-AXIS (DRILLING) THRUST 1,500 LBS
BI-DIRECTIONAL VERTICAL TURRET
NUMBER OF STATIONS: 12
SQUARE SHANK TOOL SIZE: 3/4″
ROUND SHANK TOOL SIZE: 1-1/4″
DISTANCE FROM SPINDLE FACE TO TURRET: 14″
TURNING DISTANCE: 13.8″
LIVE TOOLING
HORSEPOWER RATING (AT TOOL TIP): 2.4 HP
TORQUE RATING (CONTINUOUS): 52 IN-LB
SPEED RANGE (1-RPM STEPS): UP TO 4,000
TAILSTOCK
CENTER TAPER: MT #3
TRAVEL MAXIMUM: 11.5″
RAPID TRAVERSE / RETURN RATE: 300 IPM
THRUST / MAXIMUM: 700 LBS
GENERAL
DIMENSIONS: 93″ LR X 70 FB X 67” H
WEIGHT: 9,800 LBS
ELECTRICS: 230 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH
GE FANUC 18T CONTROL
16C COLLET CHUCK
HYDRAULIC TAILSTOCK
CHIP CONVEYOR
MISCELLANEOUS STANDARD TOOL HOLDERS
PARTS CATCHER