Top Seller
32.2" X 55" New Dah-Lih
Location:
Navasota, TX
Manufacturer:
Dah-Lih
Model:
MCV 1250
Spindle Taper:
# 50
Control:
Oi MD

Specifications

Condition:
new
Stock number:
NM08510
Device:
$2,800.00
Height:
140.5"
Control:
Oi MD
Pendent:
Yes
Scaling:
Yes
Device 2:
$3,800.00
Tool box:
Yes
Air blast:
Yes
Feed rate:
0.04 To .394 Min.
Base price:
$158,600.00
Table load:
3,300 Lbs.
Table size:
32.2" X 55"
Work light:
Yes
Oil skimmer:
$1,200.00
Tool weight:
33 Lbs.
30 tools atc:
$8,800.00
40 tools atc:
$11,800.00
Tool section:
Random / Bi-Directional
Fanuc 31 i mb:
$18,000.00
Rigid tapping:
Yes
Spindle feeds:
.04 To .394 IPM
8.4" color lcd:
Yes
Fanuc controls:
Yes
Full enclosure:
Yes
Heat exchanger:
Yes
Machine weight:
24,660 Lbs.
Graphic display:
Yes
Program restart:
Yes
Spindle chiller:
Yes
Data server 2 gb:
$2,000.00
Electrical input:
220 Volts / 60 Hertz
Main motor 35 hp:
$2,000.00
Rapid traverse z:
.472 IPM
Air / coolant gun:
Yes
Bed wash function:
$1,800.00
Power consumption:
42 KVA
Spindle taper cat:
# 50
+ data server 2 gb:
$4,800.00
Main spindle motor:
25 Hp. 220 Volts
4th. axis interface:
Yes
Maximum tool length:
4.3 X 13.8"
Table travel x axis:
49.2"
Table travel y axis:
25.6"
Tool retention stud:
MAS-1 45 Degrees
Drive motors x,y & z:
5.4 / 5.4 / 4 Hp.
Tool off set 99 pair:
Yes
Automatic lubrication:
Yes
Helical interpolation:
Yes
Transfomer (240/440v):
$1,600.00
Automatic tool changer:
24
Coolant around spindle:
Yes
Spiral type chip auger:
Yes
(w/o increase z travel):
$3,500.00
Minimum input increment:
0.0001
Programmable date input:
Yes
Tool length measurement:
Yes
Polar coordinate command:
Yes
(w/o increase z travel) 2:
$4,500.00
40 tool block look a head:
Yes
Automatic corner override:
Yes
Floor space front to back:
168"
Floor space right to left:
197"
Power coolant pump 84 psi:
$750.00
Programmable mirror image:
Yes
T-slots (size/amt./pitch):
0.866"/ 5" / 4.92"
Coolant around the spindle:
Yes
Coordinate system rotation:
Yes
Spindle head travel z axis:
27.6"
Distance table top to floor:
37.4"
Positioning / repeatability:
+/- 0.0002"/ +/- 0.0001"
Rapid traverse x and y axis:
.787 IPM
Spindle center to column way:
28"
Tool off set amount memory b:
Yes
Aicc ll, 200 block look ahead:
$2,000.00
Coolant thru spindle (700 psi):
$3,000.00
Run hour ands part count display:
Yes
Spindle nose to table min. / max:
7.8" To 34.8"
Spindle speeds infinite variable:
0 To 6,000 Rpm's
Coolant thru the spindle (280 psi):
Yes
Optional angle chamfering corner r:
Yes
Part program storage length 1280 m:
Yes
Renishaw automatic centering device:
$9,800.00
Ahead function + manual guide i function:
$3,200.00
Heidenhain liner scales for x and y axis:
$8,800.00
Data server + aicc ll, 200 block look ahead:
$3,600.00
Heidenhain liner scales for x, y and z axis:
$10,800.00
Flat type chip conveyor back -left discharge:
Yes
Direct drive spindle cat 50 taper (10,000 rpm):
$12,000.00

Description

Equipped With:
MAIN FEATURES: This machining center, with a weight of 24,660 pounds, has been designed and built of heavy- duty construction, in order to provide the capabilities of hard metal machining, at extremely accurate tolerances. HEADSTOCK 1. The Headstock casting is a box type construction, which provides maximum rigidity and ensures stable heavy machining. 2. The Fanuc AC spindle motor connects directly into the two (2) speed gear box input shaft. A wide range of spindle speed enables heavy cutting at either high or low speeds. 3. The Spindle head is equipped with a nitrogen counter balance system, which provides smooth Z axis travels, thus reducing wear on the ball screw, while maintaining the machine's high accuracy. 4. The machine is equipped with a "Long Nose Spindle" design for easy fixture and spindle/work piece clearance. This design provides more efficiency and accuracy when cutting complicated part configurations. This feature allows the use of relative short tools to carry out heavy duty machining. The "Long Nose Spindle" design, is also a remarkable advantage, especially when machining stair-shaped work pieces. 5. The tool knocking device with floating design features a buffering function which not only fully avoids damage to the spindle and bearings during tool release, but it also extends the service life of the spindle. The tool knocking motion is actuated by an air cylinder for efficient tool release. 6."Coolant thru spindle" is available for deep hole drilling, easy chip removal, and to provide the best possible machined surface finishes. 7. The high performance heat exchanger ensures a constant temperature inside the control cabinet. It provides protection for electronic components, controller and motor driver. 8. The coolant jets around the spindle effectively remove heat from the cutting tool and the work piece, and ensure high cutting accuracy. 9. A "spindle oil cooler" is equipped to prevent the spindle from getting variation & thermal deformation. COLUMN, BED & SADDLE: 1. The machine bed structure is designed by using the Finite Element Method (FEM). an element analysis technique. This technique results in a well-designed bed, that is necessary for high rigidity & and high speed cutting capabilities. 2. The bed and saddle castings are provided with oversized ribs for good rigidity and to prevent deformation. Wide slide ways allow heavy cutting and retain accuracy even at continuous and rapid traverse movement. Extra high precision, large diameter (2.48") ball screws, are provided on all the axes. The ball screws are located at the center of the slide ways and are coupled directly to the AC servo motors to eliminate cutting resistance. 4. All of the 3 axes ball screws are mounted with the servo motor on one side, and the support on the other, to ensure that no vibrations exist during ball screw rotation. 5. An automatic centralized lubrication system is standard, which provides intermittent lubrication to all slide