no-image_en.png
Location:
Zülpich, Germany
Manufacturer:
Kröger
Model:
MUP20 HALFPIPE MULDE

Specifications

Condition:
new
Gvwr:
22.00 t
Type:
MUP20 HALFPIPE MULDE
Tires:
4x550 / 60 R22.5 "new" 16PR on center rims 40 km / h
Chassis:
RAL 9011 graphite black
Tilt system:
Tilt-and-turn device, Front tilting cylinder, 1-line system
Steel hollow:
Halfpipe rear tipping tray, base plate 6mm thick (ST52),
Maximum speed:
40 kph
Technical data:
perm GG 20,000kg
Tipping hopper:
RAL 3020 Traffic red
Loading capacity:
10.30 m³
Subcategory:
Transport vehicles

Description

Type: MUP20 HALFPIPE MULDE
Central axle tipping trailer
With halbrundmulde
22 to permissible total weight (of which 4to support load)
Standard equipment:
Tires: 4x550 / 60 R22.5 "new" 16PR on center rims 40 km / h
Axles: 24 to ADR Bogie axle unit with parabolic suspension and reinforced 2x12to tilt roller bearing axles, 2050mm Spurbreite, wheel brake 420x180mm, 150mm axle square,
Wheelbase 1570mm
Pulling device: rigid pull tube with screwed 18 to flanged eyelet 40 mm DIN 11026 (required coupling to tractor DIN 11029)
(Only for agricultural purposes)
Mechanical saddle support winch with high speed
Chassis frame: in proven steel-welded construction, main carrier made of torsion-resistant rectangular tube profiles
Braking system: Two-line braking system with automatic load-dependent brake control (ALB)
4x diaphragm brake cylinder, spindle brake on front axle
Tilt system: Tilt-and-turn device, Front tilting cylinder, 1-line system
Steel hollow: Halfpipe rear tipping tray, base plate 6mm thick (ST52),
Side walls 4mm thick (ST52), hydraulic tailgate opening
Electrical system: 12-volt system according to the regulations of the StVZO with 7-pole connecting cable,
Triangular reflector and yellow side reflectors, 3-chamber lights (rubber bearing), license plate lights, position lights
Accessories: stable underrun protection, fold-over, 2x chock with holder, plastic fender at the back, hose cradle for all supply lines on the draw tube, resting pads for tipping dump for sound insulation during driving
Painting: vehicle blasted with steel crumbs and additionally degreased, thick layer primer, top coat in German quality two-component lacquer paints.
Tipping hopper: RAL 3020 Traffic red
Chassis: RAL 9011 graphite black
Technical data: perm GG 20,000kg
Empty weight approx. 5.500kg (depending on equipment)
Payload approx. 14.500kg
Support load 2,000kg
Tipping angle approx. 58 °, oil requirement tipping cylinder approx. 43.2 liters
Loader dimensions: recess inside: approx. 5.300mm L x 2.300mm W x 900mm H = approx. 10.3m³
A 1037 trough height 1200mm instead of 900mm
A 1427 Floor plate "HARDOX450" or "RAEX450" or "QUARD450" 6mm
Wear- and surface pressure-resistant steel
A 1457 KHL Side walls and floor "HARDOX450" or "RAEX450" or "QUARD450" 6mm
Wear- and surface pressure-resistant steel
DLP Info: 24to ADR-Bogie axle unit with ALB = standard equipment, axle quadrant150mm, wheel brake 420x180mm
F 3227 KHL reinforced height-adjustable, rubber-mounted bearing device designed for 4to support load up to max. 24to permissible total weight.
(Prescribed at 4to support load)
Up to 40 km / h. (Over 40km / h max. 2 to support load allowed) Design as central pipe
Coupling height = approx. 600mm
F3322 KHL Pull head SCHARMÜLLER Type K80 to 4to support load
F 5217 Seperate LED backlight on the vehicle rear
(3-pin socket 12 volt required)
F 5487 KHL Quick release for tipping hydraulics by 2-hose system
(Two control units required by the t