Top Seller
PIRANHA P-50 Ironworker, Capacity 3
Location:
Warren, MI
Manufacturer:
PIRANHA
Model:
P-50
Capacity:
3 x 3 x 3 / 8"
Weight:
1,700 Lbs.

Specifications

Condition:
new
Motor:
3 HP, 3 Phase
Weight:
1,700 Lbs.
Capacity:
3 x 3 x 3 / 8"
Angle shear:
3” x 3” x 3/8”
Throat depth:
5”
Flat bar shear:
12" x 3/8", 10" x 1/2", 6” x 3/4”
Coping/notching:
2-1/4” x 3” x 1/4”
Round bar shear:
1/4” through 1-3/8”
Square bar shear:
1/2” through 1”
Bending (optional):
6” up to 12” w/4-way die block
Punching (50 tons):
13/16” diameter through 3/4” plate
Subcategory:
Ironworkers
Subcategory 2:
Metal fabrication

Description

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.
2. Mechanical Shear Hold-downs- clamps material at change of material thickness. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3 . Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the square upper angle knife has four cutting radiuses to better fit the angle being sheared, giving you lower distortion and a higher quality cut.
6 . Coper Notcher- the low rake angle blade keeps part flat and under control during notching.
MAXIMUM SPECIFICATIONS (rated on mild steel)
Punching (50 Tons) 13/16” diameter through 3/4” plate
Throat Depth 5”
Bending (Optional) 6” up to 12” w/4-way die block
Round Bar Shear 1/4” through 1-3/8”
Square Bar Shear 1/2” through 1”
Flat Bar Shear 12" x 3/8", 10" x 1/2", 6” x 3/4”
Angle Shear 3” x 3” x 3/8”
Coping/Notching 2-1/4” x 3” x 1/4”
Motor 3 HP, 3 Phase
Weight 1,700 Lbs.
STANDARD EQUIPMENT
Mechanical Hold Down
Punch Holder, Urethane Stripper, & Die Block
Set of Angle Knives
Set of Coper Knives
Instruction/Parts Book
Coupling Wrench
1/2” Allen Wrench
Foot Switch
Set of 13” Plate Shear Knives
Coupling Wrench