Top Seller
PIRANHA P-65 Ironworker, Capacity 5
Location:
Warren, MI
Manufacturer:
Capacity
Model:
P-65
Capacity:
5 x 5 x 3 / 8"
Weight:
2,600 Lbs.

Specifications

Condition:
new
Motor:
7.5 HP
Weight:
2,600 Lbs.
Capacity:
5 x 5 x 3 / 8"
Angle shear:
5” x 5” x 3/8”
Throat depth:
8”
Flat bar shear:
15” x 5/8”, 10” x 3/4”
Coping/notching:
2-3/4” x 4” x 1/4”
Round bar shear:
1/4” through 1-1/2”
Square bar shear:
1/2” through 1”
Bending (optional):
8” up to 24” w/4-way die block
Punching (65 tons):
1-1/16” diameter through 3/4” plate
Subcategory:
Ironworkers
Subcategory 2:
Metal fabrication

Description

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.
2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3 . Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut.
6 . Coper Notcher- the low rake angle keeps part flat and under control during notching.
7. Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.
MAXIMUM SPECIFICATIONS (rated on mild steel)
Punching (65 Tons) 1-1/16” diameter through 3/4” plate
Throat Depth 8”
Bending (Optional) 8” up to 24” w/4-way die block
Round Bar Shear 1/4” through 1-1/2”
Square Bar Shear 1/2” through 1”
Flat Bar Shear 15” x 5/8”, 10” x 3/4”
Angle Shear 5” x 5” x 3/8”
Coping/Notching 2-3/4” x 4” x 1/4”
Motor 7.5 HP
Weight 2,600 Lbs.
STANDARD EQUIPMENT
Automatic Hold Down
Coupling Wrench
Punch Holder, Stripper, & Die Block
3/8” Allen Wrench
5 Punch & Die Sets 9/16” through 1-1/16”
Set of Chip Buckets
Set of Angle Knives
Extra Filter Element
Set 1” Round Bar Knives
Foot Switch
Set of 12-1/8” Plate Shear Knives
Instruction/Parts Book/Video
Set of Coper Knives