1999 MARZOLA DE 700 TMS MELAMINE PRESS LINE [PF-010383] in Spain
- $111,207 USD
- DE 700 TMS
MARZOLA DE 700 TMS Short Cycle Laminating Line: This large platen press is one that can give you the higher pressures and temperatures that you require for melamine processing or other Special Production.
-- Complete with In-feed system / Press charging and discharging. This 7.5' (2,300 mm) x 21' (6,400 mm) system can laminate Thermofused Melamine onto Particleboard or MDF at a rate of approximately (130) cycles per hour.Specifications:* (2) Thermal Oil Heaters for Thermal Oil heating medium* Dual Heating Circuits for optimal heating control of the top and bottom platens, each plate has (5) independent circuits* Thickness of heating platens 80 mm (3-1/8")* Press piston arrangement: (10) 220 mm (8.7") dia. down-stroke hydraulic rams.* Rams are heat treated and chromed to 10/100 mm* Hydraulic Pressure 185 Bars* Pressure 700 TMS* High pressure isolation pads, 200 mm thick, capacity 50 Kg/cmÃ‚Â² and max. 350Ã‚Â°C* Heating Platen Size: 2,300 mm (7.5') x 6,400 mm (21')* Lower platen height above floor is 1,130 mm (44.5") above floor.* Daylight opening 200 mm (7.8")* Platen leveling / balance system by means of rods and longitudinal Axis* Frame made up of (5) five " Heavy Duty" laminated Steel frames* Hydraulic Pump mounted on top of press on anti-vibration pads* Stainless Steel fluid tank holds 300 liters with temperature sensors and return oil filters.* Hydraulic control valve block including safety valves tested to to 250 Atms, with max. working pressure of 200 Atms* Free Standing control cabinet* Specific pressure based on (2) maximum sized panels is 400 N/cmÃ‚Â² (580 PSI).* Operating temperature max: ?Ã‚Â° C (?Ã‚Â° F).* Weight of the press system kG ( Lbs)Energy Requirements:* Heat requirement to heat-up press in two (2) hours is 600,000 kcal/Hr.* When running production with 30-Second cycles 580,000 kcal/Hr* Electrical Power for the press line: 360 kW.* Chiller for hydraulic: 21 kW* Secondary power circuits: Approx. 80 kW* Operating voltage: 50 Hz (Cycles), 380 V +/- 5%.* Control voltage: 220 VAC / 24 VDC.Compressed Air Requirements:* Pressure min: 6 bar (85 PSI).* Consumption: 1,000 mÃ‚Â³/Hr (590 CFM).This MARZOLA Press Line is in good condition and is still connected to it is a very basic line and can be automated with material handling equipment to the degree you require. There are no clamps in place to hold Decorative Structure Plates however they also can be added with factory equipment.Please Call for details concerning inspection.
Get email updates for MARZOLA DE 700 TMS