- York, PA
- $9,950 USD
- Leblond lathes
- REGAL - CUSTOM
- Spindle Bore:
- Spindle Nose:
- Stock number:
- The system is only using 2 of the possible 3 Axes.
- 19" X 98"
- Model 2:
- Age info:
- CIRCA 1977
- Overall size:
- 162" Long x 45" F-B x 73" High x ? Lbs.
- Spindle bore:
- Spindle nose:
- Swing over bed ways:
- Taper in tailstock quill:
- #4 Morse
- Servo shift spindle speeds:
- 25 to 1000 RPM
- Swing over cross slide way cover:
- Lathes in United States
- Lathes, slant bed, nc and cnc
19" X 98" LEBLOND REGAL CUSTOM CNC LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $9,950.00
Stock # 15012-P
Serial # 11E-372
Age: Circa 1977
This is a standard Leblond engine lathe that has been modified and converted to an OD grinding operation. The carriage and cross slide have been modified by removing certain parts. The original screws were replaced with servo drive ball screws and an Anilam 3000M control. The quick change gear box system, X & Y axis screws, top compound assembly, carriage lower apron assembly, threading system and end quadrant change gear system have all been removed from the machine. These parts have been discarded and are not with the machine. The Anilam 3000M 3-axis cnc system was installed on the machine in year 2007.
BASIC MACHINE SPECS
Swing Over Bed Ways: 19"
Swing Over Cross Slide Way Cover: 10"
Servo Shift Spindle Speeds: 25 to 1000 RPM
Spindle Nose: L2
Taper in Tailstock Quill: #4 Morse
Spindle Bore: 3"
Setco Precision Grinding Spindle with Wheel Guard
Setco Grinding Spindle with 8" Diameter x 1/16" Wide Diamond Wheel
Dynamically Balanced Head to .04 MILS
Type 6101.36GT, Model 261U, Serial No. 188455
3600 RPM, 1 HP, 230/460 Volts, 3 Phase, 60 Hz, 4/2 Amps
Head Can Rotate Left & Right for Alignment
Sony Digital Readout System on X Axis ONLY
(2) Tesa TT60 Air Gage Sensor Units
Allen Bradley Panelview 300 PLC Controller, New 2007
Anilam 3000M 3-Axis CNC Control with Manuals and Software Discs
3000M-3X Upgrade Program, Uses M Code Programming
Note: The system is only using 2 of the possible 3 Axes.
CNC System has Auto or Manual Control
The X & Y Axis Hand Crank for Manual Movement
Automatic Lubrication System to Carriage and Cross Slide
Hard Replaceable Bed Ways in Good Condition
Eaton Dynamic Adjustable Spindle Brake
Baldor - Anilam Electronics Axis Drives
Accordion Style Ways Covers on Y & Y Axis and X Axis Ball Screw
(1) 10" Drive Plate with L2 Backing
(1) Dead and (1) Live Center
(2) Removable Chip Pans
NO Spindle Nose Spanner Wrench
Machine Work Light
Coil Type Coolant Heater Unit and Tank
10 HP Motor, Wired for 3 Phase, 60 Hz, 230/460 Volts
Presently Wired for 480 Volt Operation
Overall Size: 162" Long x 45" F-B x 73" High x ? Lbs.
Get email updates for Leblond REGAL - CUSTOM