Top Seller
BETENBENDER 10-375 10' x 3/8"
Location:
Port Orange, FL
Manufacturer:
BETENBENDER
Model:
10-375
Capacity:
3/8"
Weight:
21,000 lbs.

Specifications

Condition:
new
Stock number:
10-375
Warranty:
1 YEAR
Machine only:
48"
Overall width:
With Gauges 104"
Overall length:
145"
Shipping weight:
21,000 lbs.
Back gauge range:
36"
Gap type machine:
(Slitting)
Machine+backgauge:
80"
Main motor (h.p.):
20
Machine dimensions:
Overall Height 84"
Strokes per minute:
11
Number of holddowns:
120
Nominal cutting length:
97"
Hydraulic tank (oil included):
66 Gallons
Knives (four(4) cutting edges):
121" x 1" x 4"
Rake of moving blade (per foot):
3/8"
Capacity - a-36 mild steel (80,000 lb. tensile):
3/8"
Capacity - 304 stainless steel (at highest rake):
1/4” Production Cutting
Subcategory:
Shears
Subcategory 2:
Hydraulic

Description

ITEM: 10' x 3/8" Hydraulic Shear
MAKE: BETENBENDER®
MODEL: 10-375
Product Features
BED - Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging
RAM - Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments
POWER RAKE - allows change of rake for minimum camber & twist
HYDRO-MECHANICAL HOLDDOWN - firmly grips material to prevent movement and tipping. Optional urethane gripping pad protects soft and polished materials from marking
ALLOY BRONZE GIBS - provides long service life and allow minimum running clearance for accurate control of blade clearance setting
FOOTSWITCH CONTROL - is activated from a fully shrouded portable footswitch operating on 120 volts
DRIVE - two hydraulic cylinders pushing or pulling directly on cross-head, no rotating pin action saving on wear
HYDRAULIC VALVES - in manifold block for a minimum of fitting and piping; "C" frame motor for precision alignment of pump
*PLEASE DESIGNATE VOLTAGE REQUIRED
Made in USA
STANDARD EQUIPMENT
36" Power Backgauge With Inch/Metric L.E.D Readout
NEMA/Square “D” Electrics
All Hydraulic Fluid
America-Made Motors
Hydraulic Self-Compensating Holddown Bar Assembly
Hour Meter
48" Squaring Arm
Light Beam Gauge
All Steel Construction
Disconnect Switch
Knives - (4) Cutting Edges
Options/Accessories
Solid Table Top (Bolt-on) (RECOMMENDED OPTIONS FOR ALL MACHINES)
“Go To” Backgauge Control with Presets
NC Control 5 Station "Go To"
48" Support Arms/Front Gauges (RECOMMENDED OPTIONS FOR ALL MACHINES)
Inlaid Scale (0-48")
Disappearing Stops (Support Arms)
Machined Solid Table Top Bed
Neoprene Hold-down Caps (RECOMMENDED OPTIONS FOR ALL MACHINES)
One Shot Lubrication (RECOMMENDED OPTIONS FOR ALL MACHINES)
Automatic Lubrication
Oil Cooler
Ball Transfers
Angle Gauge
Electronic Stroke Control
Continuous Stroke (Includes Stroke Counter)
Stroke Counter
Independent Hold-down Control
Extra Foot Pedal w/Keylock Switch
Extended Squaring Arm (4' Standard)
Flip Up Stops (Squaring Arm)
Left Hand Squaring Arm (4')
Dovetail Slots or T-Slots
Keylock Switch
Increase HP (increase Stroke)
Power Blade Gap Adjustment (10ga, 3/16" 1/4")
2 Position Power Blade Gap Adjustment (3/8", 1/2", 5/8", 3/4")
3 Position Power Blade Gap Adjustment (3/8", 1/2", 5/8", 3/4")
(RECOMMENDED OPTIONS FOR 3/8", 1/2" AND 3/4" MACHINES.)
Pneumatic Sheet Support
208V
Gap Type Machine: (Slitting)
Special Paint Colors
Other Electrics and Motors
Bolt/Shim Kit for Leveling
Crating Charge (Not an Export Crate) Still Requires Tarping
BACKGAUGES
Automatic Power Lift (RECOMMENDED OPTIONS FOR ALL MACHINES)
Manual Swing Up Back-gauge
Power Lift
Extra Length on Back-gauge
CNC Back-gauge
*ASK ABOUT OPTIONS NOT LISTED