Top Seller
LAGUN American Turnmaster 13" x
Location:
Port Orange, FL
Manufacturer:
Lagun lathes
Model:
American Turnmaster
Spindle Nose:
2.1875 in. (55.5 mm.)

Specifications

Condition:
new
Stock number:
ATV-914-HC
Warranty:
1 YEAR
Feed motor:
70 W
Net weight:
2,200 lbs (1000 Kgs)
Step chucks:
1.0625 ~ 6 in. (27 ~ 152 mm.)
Coolant pump:
0.125 HP (0.1 Kw)
Gross weight:
2,420 lbs (1100 Kgs)
5c hex collets:
0.875 in. (22 mm.)
Swing over bed:
13 in. (330 mm.)
5c round collets:
1.0625 in. (27 mm.)
With step chucks:
1.0625 ~ 6 in. (27 ~ 152 mm.)
5c square collets:
0.75 in. (19 mm.)
Expanding collets:
3 in. (76 mm.)
Coolant pump motor:
0.125 HP (0.1 Kw)
Cross slide travel:
4.5 in. (114 mm.)
Machine dimensions:
73 x 30 x 67 in. (1850 x 750 x 1700 mm)
With square collets:
0.75 in. (19 mm.)
Hole through spindle:
1.25 in. (31.75 mm.)
Spindle speed, range:
0 ~ 4000 RPM
Spindle nose diameter:
2.1875 in. (55.5 mm.)
With expanding collets:
3 in. (76 mm.)
Spindle with jaw chunks:
10 degree threaded (2.19 in.) (10 degree threaded (55.6 mm.))
Spindle with step chunks:
1.0625 ~ 6 in. (27 ~ 152 mm.)
Carriage power feed range:
0.25 to 10 in. (6 to 250 mm)
Cross slide power feed range:
0.34375 to 6.25 in. (9 to 160 mm.)
Spindle capacity, with chuck:
6 in. (150 mm.)
Variable spindle speeds, evs:
0 to 4000 RPM
Spindle with round 5c collets:
1.0625 in. (27 mm.)
Main drive, evs, 3/60/220 volt:
5 HP ( 3.75 kW)
Spindle with expanding collets:
3 in. (76 mm.)
Spindle capacity, with step chucks:
1.0625 ~ 6 in. (27 ~ 152 mm.)
Spindle speeds, infinitely variable:
0 ~ 4000 RPM
Spindle capacity, with 5c hex collets:
0.875 in. (22 mm.)
Maximum distance, turret face to spindle:
14 in. (355 mm.)
Spindle capacity, with 5c square collets:
0.75 in. (19 mm.)
Spindle capacity, with expanding collets:
3 in. (76 mm.)
Subcategory:
Engine / toolroom

Description

ITEM: 13" x 14" Ultra Hi-Precision Lathe Ball Bearing Spindle
MAKE: LAGUN®
MODEL: American Turnmaster
PART# ATV-914-HC
Product Features
For decades, Republic Lagun Machine Tool Co. has proudly offered the reliability of the American Turnmaster high precision manual lathe. Our American Turnmaster manual lathe is a Hardinge-type lathe with the quality of engineering you know to expect from Republic Lagun; always keeping quality first as testament from thousands of customers for over 45 years!
These dependable and highly accurate manual lathes are built for industry applications which require the highest precision machining, centered around medical machining. The American Turnmaster high precision manual lathes are engineered for maximum accuracy and minimal downtime. Our American Turnmaster manual lathe ranges from 9” to 13” swings with maximum turning length to 18”. The American Turnmaster high precision manual lathe ranges in power from 3 – 5 HP (2.4 – 3.7 KW)
Extreme accuracy, high precision pre-loaded angular contact ball bearing spindle
Electronic Variable Speed (EVS) drive
Hardened and precision ground alloy tool steel bedways
Equipped with 5C lever type ball bearing collet closer
One-piece headstock and bed construction