Top Seller
SHARP SV-2414S-M / SV-2414SE-M /
Location:
Port Orange, FL
Model:
SV-2414S-M / SV-2414SE-M / SV-2414SX-M
Control:
828D-240.2 828D-260.2

Specifications

Condition:
new
Stock number:
SV-2414S-M
Air:
6 CFM @ 88 psi
Height:
91.5" (2,325M)
Motion:
Cutting Feed Rate 0.04 - 393.7 ipm (1-10,000 mm/m)
Weight:
7,260 lbs (3,300)
Spindle:
Spindle Taper CAT 40
Accuracy:
Positioning Accuracy 0.00016/0.004 inch(mm)
Chip pan:
Standard
Warranty:
1 YEAR
Work table:
Table Area 28" x 13.8" (710mm x 350mm)
Screen size:
8.4 LCD 10.4 LCD
Door opening:
25" (635M)
Driving type:
Belt Drive
Control model:
828D-240.2 828D-260.2
Work capacity:
Travel X,Y,Z 24" x 14" x 18.1" (610mm x 356mm x 460)
Coolant system:
Flood Coolant Nozzles 2
Rapid traverse:
X/Y/Z: 590.6 ipm (15,000 mm/m)
Max tool length:
13.8" (350mm) 12" (304.8mm)
Max tool weight:
13.2 lbs (6kg) 15.4 lbs (7kg)
4th axis support:
Optional Standard
Magazine capacity:
10 10 [16] 24
Motor (30m/cont.):
9.3/10.7 (7/8 kw)
Max. tool diameter:
3.9" (120mm) 3.9" (120mm) [3.7 (93)] 3" (76.2)
Power requirements:
Electrical 220V (w/ transformer)/3 Phase/20 KVA/60 Hz
Programming assist:
"ShopMill-Conversational Type"
Spindle max. speed:
10,000 rpm
Cnc control features:
Controller Siemens
Machine measurements:
Floor Space W: 72.8" (1,850 M), w/ side mount 78.2" (2,000M) D: 85" (2,160 M)
Coolant tank capacity:
42 gal. (160 L)
Spindle nose to table:
3.1 - 20.94 (78.8mm-530mm)
Repeatability accuracy:
0.00012/0.003 inch(mm)
W/o adj. tool, max dia:
9" (229mm) 9" (229mm) [3.7" (93mm)] 5" (127mm)
Air blast at tool change:
Standard
Maximum workpiece weight:
770 lbs (350 Kg)
Spindle center to column:
16.9 (430mm)
Automatic tool changer (atc):
Magazine type Carousel Side Mount
Tool change time, tool to tool:
7 2.7

Description

ITEM: 24" x 14" Box Way Vertical Machining Centers with Siemens Control
MAKE: SHARP®
MODEL: SV-2414S-M / SV-2414SE-M / SV-2414SX-M
Product Features
The Sharp SV-2414 series of compact vertical machining centers are engineered to have unsurpassed quality and outperform all other machines in its category. All of our vertical machining center structural components are made of Meehanite castings with internal ribs running throughout each section. Each axis is driven by a high precision double-nut ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy
24” x 14” x 18” travel
Box way construction
10,000 rpm, CAT 40 spindle
10 tools carousel type ATC
Siemens 828D-PPU 241.2 control, 8.4” LCD display
Small footprint
STANDARD EQUIPMENT
Siemens 828-240.2 control and drives with; USB port, 2560m(1MB) memory, Embedded Ethernet, RS-232C interface, 50 blocks look ahead,4 additional M codes, M30 Auto Power Off
“ShopMill Conversational Type Programming"
Full metal enclosure with 2 large side doors
Coolant system with enlarged coolant tank
Coolant gun
Auto lubrication system
Rigid tapping
Air gun
Removable electronic hand wheel (MPG)
Door interlock
Chip pan
Air accumulator
Heat exchanger for electric cabinet
Florescent work light
Options/Accessories
4th axis kit prepped ( electrics, cables unit)
4th axis with rotary table (complete with drives, motor)
Flat type chip conveyor
Oil skimmer
Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
CTS 20 bar (300 psi) pump with tank
Tool Probe (Renishaw TS27R)
Tool Setter (Renishaw OMP40
Spindle oil chiller