Top Seller
SHARP SV-4328ST in Port Orange,
Location:
Port Orange, FL
Model:
SV-4328ST

Specifications

Condition:
new
Stock number:
SV-4328ST
Taper:
CAT-40
Warranty:
1 YEAR
Table size:
51.2" x 25.6"
Transmission:
Direct Drive
General power:
220V/ 3 phase/ 60Hz
Spindle motor:
20/25 HP
Tool capacity:
24
Floor to table:
33.5"
Max. tool length:
11.8"
Max. tool weight:
15.4 lb.
Table t-slot size:
5" x 0.7" x 3.9"
Approximate weight:
15,840 Ibs.
Machine dimensions:
114" x 114" x 122"
Max. tool diameter:
2.99"
Maximum table load:
2,200 lb.
Rapid traverse (z):
590 ipm
Positioning accuracy:
+/- 0.0002"
Rapid traverse (x,y):
945 ipm
Air requirement (psi):
6 CFM @ 88psi
Travel size (x, y, z):
43.3" x 27.56" x 24"
Without adjacent tool:
5.9"
Repeatability accuracy:
+/- 0.0001"
Fanuc systems, optional:
0i-MC, 21i-MB, 18i-MB
Fanuc systems, standard:
Oi-MD
Spindle speed (optional):
10,000 (rpm)
Spindle speed (standard):
10,000rpm (12,000rpm ceramic bearing)
Axis motor (fanuc), (x, y, z):
2.4, 4.5, 5.4 HP
Spindle motor (hp) (optional):
15/20 hp
Spindle nose to table surface:
5.1" ~ 29.1"
Tool change time, chip to chip:
6 sec
Tool change time, tool to tool:
4.6 sec
Cutting feed rate (all axes)(max):
393 ipm
Spindle center to column (throat):
28.7"
Max thrust rating x , y, z axis motor:
12 Nm, 22 Nm, 30 Nm
Ball screw diameter (x / y, z ) & pitch:
X/Y: 1.57/0.4 (inch) Z: 1.57/0.4 (inch)

Description

ITEM: 43" x 28" Box Way Vertical Machining Centers with Fanuc Oi-MD Control
MAKE: SHARP®
MODEL: SV-4328ST
Product Features
Sharp's Box Way Vertical Machining Center is an extremely rigid “C” frame design using hardened and ground Box ways. All our vertical machining centers structural components are made of Meehanite castings internal ribs running throughout each section. Each axis is driven by a high Precision double-nut ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy
43.3" x 27.5" x 24 travel, machine weight over 15,000 lbs
Induction hardened and ground box ways (X,Y,Z) for rigidity
Meehanite cast iron is used on all structural components. Finite Element Analysis
(FEA) is used to optimize the structure for rigidity
A wide saddle fully supports the worktable throughout the travel
Fanuc Oi-MD control
Fanuc digital AC servo, motors and drives
CAT-40 taper spindle with 10,000rpm/25 hp with chiller
Double anchored, pre-tensioned and double nut ball screws
20 bars coolant through spindle preparation
STANDARD EQUIPMENT
Fanuc Oi-MD control with 10.4" color LCD Screen
Remote Jog Handle
Fanuc Alpha Series Spindle Motor
Spindle Chiller
Separate Roll Out Coolant Tank
Flood Coolant
Large Side Doors
Electrical Cabinet Heat Exchanger
Automatic Lubrication System
Fluorescent Work light
Options/Accessories
SV-4328 ST Productivity Package (includes Chip Conveyor, Chip Coolant Flush System, Coolant Gun and 4 Spare M Codes)
Fanuc CNC Update Option (2MB Part Program Storage, Data Server with Ethernet, 1GB Flash Memory)
Coolant Through the Spindle Pump Option
Rotary Table Options, Tsudakoma 6" Indexer
Rotary Table Options, Nikken 7" Rotary Table Package
Rotary Table Options, Nikken 8" Rotary Table Package
Options are Factory Installed