Top Seller
SHARP SVL-2616S-M / SVL-2616SE-M /
Location:
Port Orange, FL
Model:
SVL-2616S-M / SVL-2616SE-M / SVL-2616SX-M
Control:
828D-240.2 828D-260.2

Specifications

Condition:
new
Stock number:
SVL-2616S-M
Air:
6 CFM @ 88 psi
Height:
91.5" (2,325M)
Motion:
Cutting Feed Rate 0.04 - 393.7 ipm (1-10,000 mm/m)
Weight:
7,260 lbs (3,300kg)
Spindle:
Spindle Taper CAT 40
Accuracy:
Positioning Accuracy 0.00016/0.004 inch
Chip pan:
Standard
Warranty:
1 YEAR
Work table:
Table Area 27.5" x 16.5" (700mm x 420mm)
Screen size:
8.4 10.4
Door opening:
25" (635M)
Driving type:
Belt Drive Belt Drive (opt. Direct Drive)
Control model:
828D-240.2 828D-260.2
Work capacity:
Travel X,Y,Z 24" x 16" x 18.1" (610mm x 356mm x 460)
Coolant system:
Flood Coolant Nozzles 2
Rapid traverse:
X/Y/Z: 1,890 ipm (48,000 mm/m)
Max tool length:
7.9" (200mm) 9.8" (250mm) 12" (304.8mm)
Max tool weight:
13.2 lbs (6kg) 15.4 lbs (7kg)
4th axis support:
Optional Standard
Magazine capacity:
10 16 24
Motor (30m/cont.):
9.3/10.7 (7/8 kw)
Max. tool diameter:
4.3" (110mm) 3.9" (120mm) 3" (76.2)
Power requirements:
Electrical 220V (w/ transformer) /3 Phase/20 KVA/60 Hz
Programming assist:
"ShopMill-Conversational Type"
Spindle max. speed:
10,000 rpm
Tool selection type:
Set Tool Number Random
Cnc control features:
Controller Siemens
Machine measurements:
Floor Space W: 72.8" (1,850 M), w/ side mount 78.2" (2,000M) D: 85" (2,160 M)
Coolant tank capacity:
42 gal. (160 L)
Spindle nose to table:
7.9 - 23.6 (200mm-600mm)
Repeatability accuracy:
0.00012/0.003 inch(mm)
W/o adj. tool, max dia:
6.7" (170mm) 5.9" (150mm) 5" (127mm)
Air blast at tool change:
Standard
Maximum workpiece weight:
440 lbs (200 Kg)
Spindle center to column:
17 (432mm)
Automatic tool changer (atc):
Magazine type Carousel Side Mount
Tool change time, chip to chip:
8 6
Tool change time, tool to tool:
6 7 2.7

Description

ITEM: 24" x 16" Linear Way Vertical Machining Centers with Siemens Control
MAKE: SHARP®
MODEL: SVL-2616S-M / SVL-2616SE-M / SVL-2616SX-M
Product Features
The Sharp SVL series of compact linear guide way vertical machining centers combine high productivity with great accuracy. All vertical machining centers structural components are made of Meehanite castings and internal ribs running throughout each section. The standard option come with spindle speeds of 10,000 RPM
24” x 16” x 18” travel
Linear way construction
1890 in/min (48 M/min) rapid traverse
10,000 rpm, CAT 40 spindle
16 tools carousel type ATC
Siemens Sinumerik 828D-260 control, 10.4” LCD display
Small footprint
STANDARD EQUIPMENT
Siemens 828D-PPU260.2 control and drives with ; USB port, 7680m(3MB) memory, Embedded Ethernet, RS-232C interface, 100 blocks look ahead, 4 additional M codes, M30 Auto Power Off
“ShopMill Conversational Type Programming"
Full metal enclosure with 2 large side doors
Coolant system with enlarged coolant tank
Coolant gun
Spindle Oil Chiller
Auto lubrication system
Rigid tapping
Air gun
Removable electronic hand wheel (MPG)
Door interlock
Chip pan
Air accumulator
Heat exchanger for electric cabinet
Florescent work light
Options/Accessories
4th axis kit prepped ( electrics, cables unit)
4th axis with rotary table (complete with drives, motor)
Flat type chip conveyor
15,000, 20,000 rpm spindle, Big Plus Spindle
Oil skimmer
Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
CTS 20 bar (300 psi) pump with tank
Tool Probe (Renishaw TS27R)
Tool Setter (Renishaw OMP40)