Top Seller
SHARP SVL-3320S-M / SVL-3320SE-M /
Location:
Port Orange, FL
Model:
SVL-3320S-M / SVL-3320SE-M / SVL-3320SX-M

Specifications

Condition:
new
Stock number:
SVL-3320S-M
Air:
6 CFM @ 88 psi
Height:
101.2" (2570)
Weight:
11,000 lbs (5,000 kg) 11,440 lbs (5,200 kg) 11,880 lbs (5,400 kg)
Spindle:
Spindle Taper CAT 40
Accuracy:
Positioning Accuracy 0.0002/0.005 inch
Chip pan:
Standard
Warranty:
1 YEAR
Work table:
Table Area 39.4" x 19.7" (1000mm x 500mm)
Driving type:
Belt Drive
Machine size:
Floor Space (w/o Chip Conveyor) 109.4 x 84.6 (2780 x 2150)
Spindle motor:
12.1/14.7 (9/11)
Work capacity:
Travel X,Y,Z 33.5" x 20.1" x 22" (850mm x 510mm x 560)
Coolant system:
Flood Coolant Nozzles 6
Max tool length:
9.8" (250mm) 11.8" (300mm)
Max tool weight:
15.4 lbs (7kg)
Cutting feed rate:
0.04~1,417 (1~36,000)
Max. tool diameter:
3.9" (100mm) 3.1" (80mm)
Power requirements:
Electrical 220V /3 Phase/20 KVA/60 Hz
Spindle max. speed:
8,000 rpm 10,000 rpm 12,000 rpm (opt. 15,000, 20,000)
Tool selection type:
Set Tool Number Random
Coolant tank capacity:
63 gal. (240 L)
Rapid traverse z axis:
1,417 ipm (36,000 mm/min)
Spindle nose to table:
5.9 - 27.9" (150mm-710mm)
Repeatability accuracy:
0.00012/0.003 inch(mm)
W/o adj. tool, max dia:
5.9" (150mm) 4.9" (125mm)
Rapid traverse x/y axis:
1,417 ipm (36,000 mm/min)
Maximum workpiece weight:
1,100 lbs (500 Kg)
Spindle center to column:
24" (608mm)
Automatic tool changer (atc):
Magazine type Carousel 20T Side Arm 24T Side Arm 30T

Description

ITEM: 33" x 20" Linear Way Vertical Machining Centers
MAKE: SHARP®
MODEL: SVL-3320S-M / SVL-3320SE-M / SVL-3320SX-M
Product Features
SHARP Industries is offering a new model of Linear Guide Vertical Machining Center with 33” x 20” x 22” travel. It will has a rapid traverse of up to 1,417 inches per minute,which provides users with quick positioning of the work table. The standard spindle speed is 8,000 rpm with options of 10,000 or 12,000 rpm speed. The model uses a Siemens 828-240 control system
Linear Guideway construction
8,000 rpm (10,000 & 12,000 opt) spindle
15 HP, Cat 40 spindle
Rapid traverse of 1,417 ipm
Position accuracy 0.0002" +/- inch (0.005 mm)
Repeatability 0.00012" +/- inch (0.003 mm)
STANDARD EQUIPMENT
Siemens 828D Control, 8.4 LCD Screen
Cycle 832 (AICC) (50-block look-ahead)
Advanced Surface (Nano Smoothing)
1M Memory
USB Port
CF Card
RS-232C Interface
Embedded Ethernet
Shop Mill/ Shop Turn
Rigid Tapping
Coolant Gun
Air Gun
Fluorescent work light
Leveling Bolts and Pads
Fully enclosed splash guard
Adjusting Tool with Tool Box
Alarm Light
Electric Cabinet Heat Exchanger
4 Additional M Codes
3 Axes Telescopic Covers
Removable hand wheel M.P.G
Door Interlock
M30 Auto Power Off
Air Accumulator
Spindle around Cutting Coolant
Options/Accessories
4 Axes Simultaneously
Network drive
4/5 Axis kit prepare
CTS 70 bar (1,000 psi) kit prepare
Spindle Oil Chiller
Hinge/Flat Type Chip Conveyor