Top Seller
SHARP SVG-6335 / SVG-6335A 63"
Location:
Port Orange, FL
Model:
SVG-6335 / SVG-6335A
Control:
Fanuc 0i MD

Specifications

Condition:
new
Stock number:
SVG-6335
Taper:
CAT 40 CAT 50
Warranty:
1 YEAR
Net weight:
34,200 lbs. (15,500 Kg)
Table size:
71" x 37” (1800 x 935 mm)
General power:
220V / 3 phase / 60 Hz
Table load (lbs.):
5,500 lbs (2500 Kg)
Machine dimensions:
242" x 186" x 129" (5.3 M x 3.3 M x 3.2 M)
Cnc control (fanuc):
Fanuc 0i MD
Positioning accuracy:
±.0002” ( +/- 0.005 mm)
Air requirement (psi):
5 CFM@100 psi
Max tool length (in.):
11.8” ( 300 mm)
Transmission (direct):
2 Speed Gear
Max tool weight (lbs.):
15.4 lbs ( 7 Kg ) 33 lbs ( 15 Kg )
Repeatability accuracy:
±.0002” ( +/- 0.005 mm)
Travel size (x, y , z):
63” x 34.6” x 27.6” (1600 x 820 x 700 mm)
Rapid traverse (z) (ipm):
590 ipm ( 15 M/min )
T slots (no,width,pitch):
7,0.87”,4.9” (7,22mm,125mm) 0.87”,4.9” (7,22mm,125mm)
Max tool diameter (inches):
2.95” (75 mm) 4.92” ( 125 mm )
Rapid traverse (x,y) (ipm):
787 ipm ( 20 M/min )
Tool change system capacity:
40 tools
Spindle nose to table (inches):
7.87 - 35.4” (200-900 mm)
Spindle speed (standard) (rpm):
30 - 8,000
Spindle motor cont./30mins (hp):
20/25 HP (15/18.5 Kw) 30/35 HP (22/26 Kw)
Tool change time (chip to chip):
7 sec
Tool change time (tool to tool):
4 sec
Spindle center to column (inches):
34.4” (875 mm)

Description

ITEM: 63" x 35" Box Way Gearhead Vertical Machining Center
MAKE: SHARP®
MODEL: SVG-6335 / SVG-6335A
Product Features
Sharp's Box Way Gear Head Vertical Machining Center is an extremely rigid “C” frame design using hardened and ground Box ways. All structural components are made of Meehanite castings with internal ribs running throughout each section. The spindle is driven directly by the two speed gearbox, no drive belts are used
63” x 34.6” x 27.6” ( 1600 x 820 x 700 mm ) travel
25 hp ( 18.5 kw ) Spindle Motor (SVG-6335)
35 hp ( 26 kw ) Spindle Motor (SVG-6335A)
CAT 40 Spindle Taper (SVG-6335)
CAT 50 Spindle Taper (SVG-6335A)
2 Speed Gearbox / 8,000 rpm
4 hardened and ground box ways
Spindle Chiller, Orientation, load meter, and air blast
Prepped for coolant through the spindle
40 Station Automatic Tool Changer
CNC Control with Fanuc 0i MD
CNC Control with 10.4 color LCD
Remote jog handle (MPG)
STANDARD EQUIPMENT
Auto-lubrication system with alarm
Rigid tapping
Coolant gun
Halogen work light
Alarm light (3 tier)
Heat exchanger for electric cabinet
Hinged belt chip conveyor (42" discharge height)
92 gallon roll out coolant tank
Flood coolant system
Tramp oil skimmer