Top Seller
SHARP SVX-500 23" x 31"
Location:
Port Orange, FL
Model:
SVX-500
Control:
Fanuc 31i-B5

Specifications

Condition:
new
Stock number:
SVX-500
Air:
6 CFM @ 88psi
Type:
Built in
Motor:
Spindle motor (Hp (Kw)) 20/25 (15/18.5)
Table:
Table area 19.7" (500mm)
Taper:
CAT40 Big Plus
Travel:
X axis travel 23.6" (600mm)
Bearing:
Ceramic bearing
Control:
Fanuc 31i-B5
Spindle:
Speed 15,000 rpm
Voltage:
3PH 220V 60HZ/45KVA
Accuracy:
X, Y, Z axis: Position (inch (mm)) +/-0.00006" (0.0015")
Atc type:
Carousel, CAT40 Big Plus
Warranty:
1 YEAR
Feed rate:
Rapid traverse X/Y Axis (ipm (mm/min)) 2,362 (60,000)
Screen size:
10.4"
Transmission:
Direct Drive
A axis travel:
-110 ~ 20°
C axis travel:
360°
Chip conveyor:
Hinge type
Y axis travel:
31.9" (810mm)
Z axis travel:
19.7" (500mm)
Coolant system:
Flood coolant nozzles 6
Max workpiece wt:
350 kg (770 lbs.)
Weight (lb (kg)):
12,750 (28,050)
Power requirement:
Electrical 3 Phase/45 KVA
Height (inch (mm)):
127.1" (3230)
Spindle oil chiller:
Oil Type
Machine measurements:
Floor space (inch (mm)) W: 91.3"(2320) x D:169" (4295)
Automatic tool changer:
ATC capacity 30
T-slot (width x degree):
0.7" x 45° (18 x 45°)
Air blast at tool change:
OK
Door opening (inch (mm)):
31.5" (800)
Method of tool selection:
Set tool number
Max. tool weight (lb (kg)):
15.4 (7)
Feed motor (fanuc) (hp (kw)):
X/Y/Z/C : 6(4.5), A: 7.3 (5.5)
Max. tool length (inch (mm)):
11.8" (300)
Max tool diameter (inch (mm)):
2.99" (76)
Spindle nose to table (a=0°):
2"-21.7" (50-550)
A axis: position (arc seconds):
+-6
C axis: position (arc seconds):
+-5
Coolant tank capacity (gal (l)):
63 (240)
Cutting feed rate (ipm (mm/min)):
0.04-1,890 (1-48,000)
Without adjacent tool (inch (mm)):
4.9" (125)
A axis: repeatability (arc seconds):
+-3
Air blower nozzle (for cutting dry):
1
C axis: repeatability (arc seconds):
+-3
Linear system roller guide (srn-45):
45 (Roller)
Rapid traverse z axis (ipm (mm/min)):
1,890 (48,000)
X, y, z axis:repeatability (inch (mm)):
+/-0.00006" (0.0015")

Description

ITEM: 23" x 31" x 19" 5-Axis Vertical Machining Center
MAKE: SHARP®
MODEL: SVX-500
Product Features
The Sharp SVX- 500 vertical machining center is engineered to have unrivaled quality and outperform all other machines in its category. Sharp’s SVX-500 allows true 5-sided and 5-axis simultaneous machining. Unlike the 3-axis that requires a separate setup for cutting different sides of a part, the 5-axis machine requires the part to be set only once and rotated into a series of positions to machine each side without the need to reset the part. All major castings of the SVX-500 are analyzed using the Finite Element Method (FEM) to locate areas of stress and strain, multiple loading conditions from thermal, gravity, centrifugal and enforced displacement. Ribs locations are properly defined to maintain rigidity throughout the entire machine. The 5-axis is constructed using the box-in-box design to assure accuracy and rigidity under different cutting conditions
Fixed table design, head moves along X and Y axis for maximum rigidity
Box-in-box structure eliminates overhang on linear axes
23.6" x 31.8" x 19.7" travel (X,Y,Z)
Trunnion table with A and C axis travel
15,000 rpm Big Plus spindle, 60M/min (2,362 ipm) rapid
Fanuc or Siemens control
STANDARD EQUIPMENT
Fanuc 31i-B5 Control, 10.4" color LCD
Fanuc 2-year warranty
AICC II (200 block look ahead)
Manual guide I
USB port
Embedded Ethernet
RS-232C Interface
5120 M memory
3 Dimensional cutter
3D interference check
High-speed smooth TCP
Rigid tapping
3 axis (X,Y,Z) linear scale
2 axis (A/C) rotary encoder
Spindle air blast (Auto)
Automatic lubrication system
4-additional M code
M30 auto power off
Removable hand wheel M.P.G
Safety door lock
Electric cabinet heat exchanger
LED work light
Alarm light
Spindle oil chiller
Oil skimmer
Cutting coolant around the spindle
Hinge type chip conveyor with bucket
Fully enclosed splash guard
Coolant system-240L tank capacity
CTS preparation (70 Bar)
Coolant Gun
Air Gun
Air accumulator
Leveling bolts and pads
Adjusting tool with tool box
Voltage: 3PH 220V 60HZ/45KVA
780-49364ATS (silver)/ RAL7021 (black)
Operators manual and part list menu in English