Top Seller
SHARP STF-60 60" x 40"
Location:
Port Orange, FL
Manufacturer:
Rapid lathes
Model:
STF-60
Distance between Centers:
40" (1016)
Spindle Nose:
A2-11 (Opt. A2-15, A2-20)

Specifications

Condition:
new
Stock number:
STF-60
Bed:
Width of Bed 31.88" (810)
Feed:
X, Z-axis rapid feed rate 196.85"/min (5000 mm/min)
Motor:
Spindle Motor 30 HP
Travel:
X-Axis Travel 19.7" (based on 4 way hyd turret installed on carriage)
Bed way:
2 V, 2 Flat Ways
Control:
Control Fanuc Oi Control
Capacity:
Max Swing Over Bed 59.84" (1520)
Warranty:
1 YEAR
Headstock:
Spindle Bore 5.98" (152mm) (Opt: 9", 12", 15")
Op-turret:
Turret Type 4 tools (H4) 8 tools (V8), 12 tools (V12), VDI (coolant access)
Coolant pump:
1.7 HP (1.275 kw)
Spindle nose:
A2-11 (Opt. A2-15, A2-20)
Length of bed:
135.83" (3450)
Spindle taper:
MT #6
Z-axis travel:
39.37"
Hydraulic pump:
2 HP (1.5 kw)
Tool shank/numbers:
1.23" x 1.23", 1.57" x 1.57" (40mm x 40mm)
X-axis servo motor:
4 HP (Fanuc AC servo)
Y-axis servo motor:
10 HP (Fanuc AC servo)
No. of spindle speeds:
4 steps of gear, command by M code, hydraulic driven
Swing over cross slide:
43.31" (1100)
Range of speeds (44.1"):
4-420 rpm (may vary by chuck size or motor HP)
Distance between centers:
40" (1016)
Range of speeds (>44.1"):
4-350 rpm (may vary by chuck size or motor HP)
Tool holder bore diameter:
1.97"
X,z-axis cutting feed rate:
118.11"/min (3000 mm/min)
Diameter of x-axis ball screw:
40 mm
Diameter of z-axis ball screw:
63 mm
Subcategory:
Cnc

Description

ITEM: 60" x 40" High Precision CNC Flat Bed Lathe
MAKE: SHARP®
MODEL: STF-60
Product Features
This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STF series is available with option of 9", 12" or 15" spindle bore, 37.38"- 59.84" swing over bed, bed width of 31.88" and the spindle motor is available up to 30 HP
The hardened and ground bedways are made from high quality Meehanite castings. The spindle drive has 4 steps to deliver full power at all speeds. Bedways and ballscrews are centrally lubricated with low level alarm. Headstock is equipped with heat exchanger to disperse heat and maintain spindle accuracy. Full length chip conveyor and enclosed splash guard are all standard accessories
This is a heavy duty precision CNC lathe that can function at full horsepower during low and high speeds
The large spindle bore and wide bedways are ideal for big parts and large mold work pieces
This machine is available with option 9", 12" or 15" spindle bore, 37.38"- 59.84" swing over bed and bed width of 31.88"
The hardened and ground bedways are made from high quality Meehanite castings
The spindle drive has 4 steps to deliver full power at all speeds
The bedways and ballscrews are centrally lubricated with low level alarm
The headstock is equipped with a heat exchanger to disperse heat and maintain spindle accuracy
A full length chip conveyor and enclosed splash guard are all standard accessories
STANDARD EQUIPMENT
Spindle 4-steps speed auto change
XZ-axes auto lubrication system
XZ-axes with Turcite-B
XZ-axes C3 ball screw
Hydraulic 4-way tool turret H4
Rear Chain type Chip conveyor
Coolant system
Fully enclosed splash guard
Heat exchanger
Electron hand wheel
Alarm lamp for working and cutting finish
Work lamp
Dead center
Level pads
Tools and tool box
Operation manual
RS-232 interface
Standard packing pallet
Options/Accessories
Transformer 55KVA
Transformer 60KVA
3-jaw scroll strong chuck (direct mounted) A2-11-20" (500mm)
3-jaw scroll strong chuck (direct mounted) A2-11/15-25" (630mm)
Hydraulic 3-jaw wedge type through-hole power chuck 18"
Hydraulic 3-jaw wedge non through-hole power chuck 18"
4-jaw independent chuck 32" (810mm, A2-11)
4-jaw independent chuck 40" (1000mm, A2-11)
4-jaw independent chuck 50" (1250mm, A2-11)
Face plate with 4-jaw, A2-11-32"
Face plate with 4-jaw, A2-11-40" (grip range 150-900mm)
Face plate with 4-jaw A2-11-50" (grip range 150-1150mm)
Steady rest 16" (bearing type, grip range 60mm-400mm)
Steady rest 24" (bearing type, grip range 380mm-600mm)
Follow rest (grip range 30-150mm)
Boring attachment for bar diagram 120mm
Spindle oil chiller 12000BTU
Hydraulic turret V-8 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Hydraulic turret V-12 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Air conditioner
Extra charge for spindle bore changed to 9" (230mm) fit to spindle no