Top Seller
CLAUSING/IBARMIA SERIES F 1.38" Geared-Drive
Location:
Port Orange, FL
Manufacturer:
Clausing presses
Model:
SERIES F
Capacity:
1.80" (45mm) maximum

Specifications

Condition:
new
Stock number:
BF-35
Type:
Standard Auto feed reversing for tapping Model
Maximum:
23.23" (590mm)
Weights:
Net weight 2,756 lbs (1250Kg)
Warranty:
2 YEAR
X travel:
27.56" (700mm)
Y travel:
14.17" (360mm)
Capacities:
Maximum drilling capacity in steel 1.38" (35mm)
Dimensions:
Height (A) 81.9" (2130mm)
Spindle taper:
ISO-30
Base width (i):
29.53" (750mm)
Manufacturer 2:
Clausing
Quill diameter:
2.95" (75mm)
Standard motor:
1800/3600 rpm
Shipping weight:
3,197 lbs (1450Kg)
Main motor power:
1.5/2 Hp (1.1/1.5Kw)
Overall width (j):
61.81" (1570mm)
Overall length (b):
57.1" (1450mm)
Worktable width (f):
14.17" (360mm)
Spindle speeds (rpm):
95, 135,190, 267, 380, 534, 750, 1065, 1500 190, 270, 380, 534, 760, 1070, 1500, 2130, 3000 —
Spindle to table (c):
Minimum 0"
Worktable height (g):
35.43" (900mm)
Worktable length (h):
47.24" (1200mm)
Head geared-motor power:
.1 Hp (.07Kw)
Maximum head height (e):
94.5" (2400mm)
Coolant pump motor power:
.12 Hp (.09Kw)
Milling capacity in steel:
1.80" (45mm) maximum
Number of automatic feeds:
3
Tapping capacity in steel:
1.18" (30mm) maximum
Drilling capacity in steel:
1.38" (35mm) maximum
Spindle center to column (d):
15.08" (383mm)
Milling capacity in cast iron:
3.20" (80mm) maximum
Tapping capacity in cast iron:
1.30" (33mm) maximum
Drilling capacity in cast iron:
1.57" (40mm) maximum
Spindle travel (drilling depth):
7.87" (200mm)
Maximum milling capacity in steel:
1.80" (45mm)
Maximum tapping capacity in steel:
1.18" (30mm)
Auto feed range in./rev. (mm/rev.):
.0039/.0079/.118 (.1/.2/.3)
Number of speed (see speed charts):
18
Optional spindle taper (on request):
4MT
Maximum milling capacity in cast iron:
3.20" (80mm)
Maximum tapping capacity in cast iron:
1.3" (33mm)
Maximum drilling capacity in cast iron:
1.57" (40mm)
Shipping dimensions (length x width x height):
67" x 67" x 95" (1.7 x 1.7 x 2.4m)
Subcategory:
Drills

Description

ITEM: 1.38" Geared-Drive Prismatic Column Drills
MAKE: CLAUSING/IBARMIA®
MODEL: SERIES F
PART# BF-35 / BF-35RS
Product Features
SeriesF Geared-drive Prismatic-column Drills With Electromagnetic Clutch Automatic Feed Control
The F series Industrial Drilling Machine is equipped with standard features that allow a wide range of drilling/milling applications. The rotating head, rotates 45° left or right, gives even more machining flexibility
Drilling capacity in steel: 1.38" (35mm) maximum
Drilling capacity in cast iron: 1.57" (40mm) maximum
Milling capacity in steel: 1.80" (45mm) maximum
Milling capacity in cast iron: 3.20" (80mm) maximum
Tapping capacity in steel: 1.18" (30mm) maximum
Tapping capacity in cast iron: 1.30" (33mm) maximum
18 spindle speeds
Automatic feed reversing system for tapping on “RS” models
Adjustable vertical position of head by geared-motor
Head rotates 45° left or right of center
Large worktable with 3 T-slots
Hardened and ground high quality steel gears
Gear box lubrication by automatic pump
Guide ways lubricated by manual pump
Speed plate and selecting levers on front of head
High/low speed range selector
Coolant tank and pump in machine base
Co-ordinate cross slide table
Automatic feed and cut-off by electromagnetic clutch
Work light
Front hand wheel for fine feed work
Depth scale and adjustable depth stop
Built-in low voltage electrical equipment in column rear
Emergency STOP
Spindle turn selection switch
Drill guard with microswitch
Options/Accessories
50% lower feed range
Digital read-out system for table
Electronic SERVO feed unit X/Y axes
Quick tool change nut for ISO-30
Cross slide table
Cycle start foot pedal
Foot pedal for reversing
Worklight with magnetic base
Coolant system with independent container
PART # ITEM
7044 Coolant System with separate tank (all models
7022 Worklight with magnetic base (all models)
PST Cycle or spindle turn START foot pedal
PSR Spindle reverse foot pedal (for tapping)
MH-4 Cross Slide Table 27.56" x 14.17"
(Series P for Models BP-40, BP-50, BP-70) 661 lbs
AR-F 50% lower feed rate range
LDG-F Digital read-out system (2-axis), for MH-4 cross table
SERVOX-F Servo feed X axis
SERVOY-F Servo feed Y axis
TCR-F Quick tool change nut for ISO-30