Top Seller
SHARP VH-3 12" x 51.2"
Location:
Port Orange, FL
Manufacturer:
SHARP
Model:
VH-3
Weight:
5,830 lbs.

Specifications

Condition:
new
Stock number:
VH-3
Table:
Working surface ( length x width) 51-3/16 x 11-13/16"
Motors:
Vertical spindle 5 HP
Warranty:
1 YEAR
Floor area:
107 x 90"
Coolant pump:
1/8 HP
Machine size:
Overall height 95-1/4"
Quill travel:
5-1/8"
Vertical spindle:
Spindle taper NST #40
Horizontal spindle:
Spindle taper NST#50
Cross travel of arm:
20-1/16"
Net weight (approx):
5,830 lbs.
Horizontal spindle 2:
7.5 HP
Quill feeds (in/rev):
0.0019, 0.0038, 0.0076
Rapid traverse, vertical:
59-13/16 ipm
Spindle speed (variable):
120 - 3,600 rpm
Spindle speeds (12 steps):
35 - 1,382 rpm
Feeds, vertical (12 steps):
1/4 - 12-7/16 ipm
Table feed and rapid traverse:
3 HP
Feeds, longitudinal (12 steps):
1/2 - 24-7/8 ipm
Distance from spindle end table:
5-1/8 - 23-5/8"
Distance from spindle to column:
3-7/8 - 24-1/8"
Horizontal rotation of over arm:
360°
T-slot (nominal size x no. x pitch):
5/8 x 3 x 2-3/4"
Rapid traverse, longitudinal & cross:
116-1/2 ipm
Swivel angle of head (left and right):
45°
Distance from center of spindle to table:
7/8 - 19-3/8
Travel (longitudinal x cross x vertical):
37-3/8 x 14-13/16 x 18-1/2"
Distance from center of spindle to over arm:
7-1/8"
Subcategory:
Mills
Subcategory 2:
Horizontal

Description

ITEM: 12" x 51.2" Vertical/Horizontal Combination Mill
MAKE: SHARP®
MODEL: VH-3
Product Features
12”x 51.2” table, 14.8”x 37.4”travel, 5HP #40 vert., 7.5HP #50 horizon
SHARP milling machines are constructed from certified MEEHANITE castings that provides high rigidity and excellent vibration dampening characteristics. The models are equipped with hard chromed dovetail ways or hardened and ground box ways for superior wear resistance . For almost 30 years, the SHARP mills have been one of the most reliable mills in the industry
A versatile model with “two machines in one” design, offering Vertical and Horizontal milling operations in one set-up. Changer over from one operation to the other is quick and simple. All it takes is the swing over of the over arm and repositioning of the locating pins
Separate motors for the vertical and horizontal spindles
5 HP variable speed drive vertical spindle with #40 taper
7-1/2 HP geared head drive (12 steps) horizontal spindle with #50 taper
The vertical spindle is equipped with electro-magnetic brake for instant, fast action stop of the quill; it is also equipped with electro-magnetic lock for quick and simple change of tool holder. Power draw bar is available as an option
The vertical head has a joystick that control forward and reverse of the spindle, a handy feature for most tapping operations. A separate lever controls spindle up and down feed
The saddle is built with 2 oversized box ways, hardened and ground, to ensure the stability of the table under heavy milling conditions
A single powerful motor drives the feed and rapid traverse of the table, saddle and knee. Powerful knee feeds allow deep boring and drilling of large work piece. It also allows simultaneous multi-axes feeds
The table is equipped with slip clutch as overload protection, a superior design than shear pins
The horizontal spindle speed goes as low as 35 rpm for heavy duty milling jobs
Changeover from vertical to horizontal operation is quick and easy
The machine is equipped with Climb Milling Compensator for smooth and stable horizontal climb milling operations
The adjustable automatic lube system maintains proper lubrication at desired intervals to the saddle, the table, the knee and the column
Manual movement of the table is controlled by hand wheel installed at the front of the table for easy operation
Gears, shafts and pins are made out of Chrom-Moly material, hardened and ground for precision and durability. They are lubricated constantly via a pressurized lube system
Ways are fully gibbed to ensure smooth sliding motions
STANDARD EQUIPMENT
Coolant system
Electro-magnetic spindle brake
Pressurized auto lube system
Chip pan
Horizontal arbor (1-1/4” dia.) with 2 arbor supports
Tool box with tools
Options/Accessories
CALL FOR PRICE
Power draw bar with foot pedal control
Halogen work light
Digital Readout System