Top Seller
FOREMOST (Bantam) B224 / B424
Location:
Port Orange, FL
Manufacturer:
RAM press brakes
Model:
B224 / B424 / B624 / B824
Stroke:
20 spm
Capacity:
24 Tons

Specifications

Condition:
new
Stock number:
B224
Off:
Press brake will not operate.
Ton:
SHUT HEIGHT (in.) MAX. BOX DEPTH (in.) PUNCH HEIGHT (in.)
Foot:
Operate with foot valve only.
Hand:
Operate with pushbuttons and foot valve.
24 ton:
7-1/2 11-1/2 (opt.) 13-1/2 (opt.) 2.0 6.5 7.9 3-3/4 10-1/8 12-1/8
Capacity:
24 Tons
Warranty:
1 YEAR
Bed width:
2 ft 4 ft 6 ft 8 ft
Thickness:
Vee Die Banding Force Tons/ft Min. Ram Stroke (in.) Free Air per Stroke Max. Sheet Width (in.)
Bed length:
2' to 8'
Ram height:
8" 13" 17-1/2" 23-5/8"
1/2 (0.500):
4 32.0 1.88 4.15 9
1/4 (0.250):
2 16.0 0.93 2.06 18
3/8 (0.375):
3 24.0 1.41 3.12 12
3/16 (0.187):
1-1/2 12.0 0.66 1.50 24
5/16 (0.312):
2-1/2 20.0 1.17 2.59 14
9 ga (0.150):
1-1/4 9.2 0.56 1.24 31
10 ga (0.135):
1-1/8 8.3 0.50 1.10 35
11 ga (0.120):
1 7.4 0.44 0.97 39
12 ga (0.105):
7/8 6.4 0.38 0.84 45
13 ga (0.090):
3/4 5.5 0.31 0.68 52
14 ga (0.075):
5/8 4.6 0.28 0.62 63
16 ga (0.060):
1/2 3.7 0.23 0.51 72
18 ga (0.048):
3/8 3.0 0.17 0.38 96
20 ga (0.036):
5/16 2.1 0.14 0.31 96
22 ga (0.030):
1/4 1.8 0.12 0.26 96
Max. free air:
4.4 ft³
Manufacturer 2:
Foremost
Shipping weight:
1,920 lbs. 2,880 lbs. 3,850 lbs. 4,500 lbs.
Max. back gauge depth:
19" 21-1/2" *
Max. speed at full stroke:
20 spm
Subcategory:
Hydraulic

Description

ITEM: 2' - 8' x 24 Ton Bantam Press Brakes
MAKE: FOREMOST (Bantam)®
MODEL: B224 / B424 / B624 / B824
Product Features
Use the versatile Foremost Bantam for a multitude of prototype and production press brake operations
Stroke Power Control : Twelve or twenty-four tons of ram force is available throughout the stroke to bend material up to 3/8" or 1/2" thick. Adjusting the air pressure alters power to suit the operation. extends tool life and reduces air consumption
Stroke Speed Control : Hooded foot valve provides full control of stroke speed. The operator can inch the ram down to a scribe line or run it down for higher production. The stroke may be stopped or reversed at any point. and the forming action may be slowed lo reduce sheet whip-up. Counter balanced ram automatically reverses when the foot control is released or the air supply is turned off
Stroke Length Control : Positive stop screw adjustment assures accurate stroke length control. from 0" to maximum. Shortening the stroke speeds production and reduces air consumption. Bed adjusts to accommodate various dies and to reduce the pinch point to a minimum
Rugged Construction : Heavy steel plate limits deflection to less than 0.0015" per foot. Dual air cylinders provide power through a one-piece rocking lever designed to resist off-center loads. Ram guides are adjustable for minimum tolerance and maximum precision
Low Maintenance : Completely pneumatic; there is no motor. clutch or brake to service or adjust. With a minimum of moving parts. Foremost Bantam Press Brakes assure years of trouble-free service
Pushbutton Control : Two-hand control keeps fingers away from the die when bending small parts while allowing operator full control of the stroke through the foot pedal. Both pushbuttons must be simultaneously depressed and held to activate the foot control valve. The ram retracts when the foot valve or either pushbutton is released. Full length support table adjusts to level of bottom die. Pushbutton control is also easily retrofitted on previous models
Two-hand pushbutton control in sturdy metal enclosure
Sheet support table 12" deep x bed length
Keyed Mode-of-Operation selector switch
Key removable in all three modes
HAND: Operate with pushbuttons and foot valve
FOOT: Operate with foot valve only
OFF: Press brake will not operate
Sheet Support Table : Table 12" deep x bed length in 10 gauge welded steel fabrication. Vertical adjustment accommodates a full range of die heights. Same as labia included with the pushbutton control option
Floor Stand : Welded 10 gauge steel construction. Comer mounting plates have a through hole to accommodate vibration mounts or to bolt the machine to the floor
Micrometer Back Gauge : Gauge permits faster, more accurate set-up. Unit is independently adjustable from 0 to 4" Handwheel graduations read movement in 0.001" increments. Verbal and horizontal adjustments
Extra Shut Height : This option provides added die space for one-piece box forming. Chart is ba