Top Seller
SHARP OD1022H / OD1022S 10"
Location:
Port Orange, FL
Model:
OD1022H / OD1022S
Grinding Length:
3.9"
Weight:
4,500 lbs.

Specifications

Condition:
new
Stock number:
OD1022H
Table:
Auto Feed (vari-speed) 2 to 160 IPM
Motors:
Wheel Drive 5 HP
General:
Width x Depth 10' x 6'
Capacity:
Swing over Table 10.6"
Warranty:
1 YEAR
Tailstock:
Spindle Stroke 1.25"
Work head:
Taper of Center MT#4
Wheel motor:
1 HP
Wheel speed:
1,650 RPM
Center taper:
MT #4
Swivel angle:
+/- 15 degrees
Tank capacity:
Coolant tank (gal.) 20
Approx. weight:
4,500 lbs.
Grinding wheel:
OD x Width x ID 16” x 1.5” x 5”
Work head drive:
0.5 HP
White-headed range:
Infeed range 10"
Hydraulic pump drive:
1 HP
Max. grinding length:
3.9"
Optional wheel width:
2"
Hydraulic tank (gal.):
15
Max grinding diameter:
10"
Distance between center:
21.6"
Max load between centers:
180 lbs.
Rapid forward and retract:
1.6"
Manual feed (per revolution):
0.5"
Manual feed, graduation (dia.):
0.08”
Manual feed, revolution (dia.):
0.0002”
Spindle speed (vari-speed, h-l):
30-180 RPM (L)
Auto infeed range (s model only):
— 0.00001” to 0.04”
Internal grinding attachment (opt.):
Grinding Bore Range 0.6” to 3.9”
Swivel towards and away from operator:
6 degrees and 9 degrees
Auto infeed rate (s model only) (in/min):
— 0.04 – 2.0
Subcategory:
Grinders
Subcategory 2:
Cylindrical

Description

ITEM: 10" x 22" Cylindrical Grinders with CNC
MAKE: SHARP®
MODEL: OD1022H / OD1022S
Product Features
Various grinding operations can be performed on these models
Entire table way is hand scraped to retain lubricating oil at all times
Spindle of wheel head is mounted on 3 matched pairs of preloaded high precision angular contact bearings by FAFNIR to ensure precision grinding
H model has manual wheel head infeed, with rapid approach and retract mode
S model has CNC single axis wheel head infeed system driven by servo motor and precision ball screw using touch screen conversational program
Worktable is driven by variable speed inverter motor; table feed rate can be adjusted by simply turning a knob
Work head can swivel 45 degrees each way for taper grinding
The work head spindle that turns the work piece is equipped with variable speed control for easy setting of the turning speed. It also has high/low gear to ensure enough torque in turning heavy pieces
Work head is equipped with 5C-lever type collet closure for quick and precise holding of work piece
Table can swivel for taper grinding
Spindle of wheel head has variable speed drive
Wheel head can swivel 15 degree left or right to perform shoulder grinding
Separate auto lube systems for table ways and wheel head ways
Change of grinding wheel can be done safely by loosening of set screws instead of using special clamps to loosen the wheel flange nut
STANDARD EQUIPMENT
5C Lever Type Collet Closure
Auto Lube System
Coolant System (12 Gal) with splash guard
Grinding Wheel with Flange
Wheel Extractor
Carbide Tip Center (2)
Balancing Arbor with Stand
2 Diamond Dresser (table & tailstock)
Wired 220V (440V Requires Optional Transformer)
Toolbox & Tools
Options/Accessories
CALL FOR PRICE
440V Transformer for OD618
3-Jaw Chuck (6”) with Back Plate
Insider diameter grinding attachments (3) holders, (3) wheels
6” Magnetic Chuck with Back Plate
Spare Wheel Adapter (Flange)
Carbide half center
Auto drive dogs (6)
Double shoe steady rest
Triple shoe steady rest
Angle dresser, table mounted
Radius dresser, table mounted
Micro feed for wheel head (S models only)
Work rest (2)
Balancing Stand
Coolant System with Paper Filters (25 gal)
Coolant System with Paper Filters and Magnetic Separator (25 gal)
Hydraulic tailstock (factory installed)
A swing down Internal Diameter grinding attachment is available for
different sizes of ID grinding