Top Seller
VICTOR 618E in Port Orange,
Location:
Port Orange, FL
Manufacturer:
Victor lathes
Model:
618E
Spindle Nose:
2.189”

Specifications

Condition:
new
Stock number:
618E
Power:
Inverter spindle motor 3 HP, 220V, 3PH
Capacity:
Swing over carriage 9"
Warranty:
1 YEAR
Tailstock:
Tailstock spindle diameter 1.358”
Coolant pump:
1/8 HP
Gross weight:
2,640 lbs.
Inch threads:
3.175 ~ 500 TPI(digital threading system)
Metric threads:
0.55 ~ 6.55 mm(digital threading system)
Swing over bed:
11"
D.c. feed motor:
110V, 70W
Spindle capacity:
With jaw chucks 6"
With step chucks:
1-1/16” to 6”
Cross slide travel:
6"
Feed inverter motor:
1/2 HP
Weight & dimensions:
Machine dimensions (LxWxH): 73” x 30” x 67”
Hole through spindle:
1-1/4"
Compound slide travel:
3"
Spindle nose diameter:
2.189”
With round 5c collets:
1-1/16"
Swing over cross slide:
6"
With expanding collets:
3"
With square 5c collets:
3/4"
Distance between center:
18"
Spindle nose i.d. / o.d:
5C / 4º taper
Tailstock spindle taper:
M.T. #2
Variable spindle speeds:
0 ~ 4,000 rpm (5C Collet) / 0 ~ 3,000 rpm (6” 3-Jaw Chuck)
With hexagon 5c collets:
7/8"
Tailstock spindle travel:
3-3/4"
Threads, feeds & travels:
Lead screw diameter N/A
Carriage power feed range:
5/16” ~ 7”
Cross slide power feed range:
3/16” ~ 4”
Quick-action compound slide travel:
0.1"
Subcategory:
Engine / toolroom

Description

ITEM: 6" x 18" Super Precision Toolroom Lathe with Digital Threading Control
MAKE: VICTOR®
MODEL: 618E
Product Features
High precision toolroom lathe with Digital Threading control is driven by a smooth 3 HP frequency controlled motor that runs virtually vibration free and extremely quite. Easy to use LCD touchscreen to simplify threading operations by selecting target TPI or mm pitch on the screen. DRO capabilities are built-in as standard. By eliminating traditional threading gearbox, Victor 618e toolroom lathe is easy to maintain, yet provides superior accuracy and performance
Digital Threading operations are microprocessor controlled and carried out by synchronized spindle speed and servo motor driven leadscrew
LCD touchscreen to select thread pitch (TPI or mm) with no gears to change
DRO functions integrated into LCD panel features linear scales on X & Z axis
Infinitely variable spindle speeds from 50 ~ 4,000 rpm
The spindle is mounted in high precision preloaded angular contact ball bearings
Hardened and ground alloy tool steel bed ways
Full bearing carriage with Turcite-B slideway bearing material between carriage and bed
Fast lever collet chucking with a single movement
Independent infinitely variable feeds control on carriage and cross slide
Automatic thread length control with fine adjustable stops for accurate threading
Quick-action tool post slide for threading is instantly cleared from work
5C lever type collet closer standard
3 HP frequency controlled motor (inverter drive)
Digital Threading LCD Panel
The leadscrew is driven directly by a servo motor. Through operation of interface, a spindle decoder is used to transfer the motion of leadscrew to rectilinear one. The LCD touchscreen shows the data that is applied to the control panel
Rapidly returning to the origin is executed according to the principle of temporarily coming off the tracking mode
Feed rate per minute of auto feed is calculated with MODBUS communication protocol from interior message data of the converter, therefore it enhances greater cutting precision
STANDARD ACCESSORIES
LCD touchscreen with digital threading system
DRO functions integrated into LCD touchscreen
Variable frequency drive
5C lever type collet closer
Tool holder
Drive plate
Drive gear
Drive dog
Test bar
Headstock center
Tailstock
Coolant system
Leveling screws and pads
Manual and parts list
Options/Accessories
OPTIONAL SPECIAL PACKAGE INCLUDES
6" zero-set 3-jaw chuck with 4º taper back plate
Halogen work light
Chip and coolant shield (High impact resistance Lexan Polycarbonate resin)
OPTIONAL ACCESSORIES
Tool setting gauge
5C collet fixture plate
Chip and coolant shield
Vertical cut-off slide
Steady rest
Follow rest
Face plate
Angle plate
Taper attachment
Radius turning attachment
6" zero-set 3-jaw scroll chuck with 4º taper back plate
6" 4-jaw independent chuck with 4º taper back plate
Micro carriage stop with indicator
4-position indexable tool post
Rear tool holder slide assembly
Step chuck and clo