Top Seller
CLAUSING/IBARMIA SERIES P 2.76" Geared-Drive
Location:
Port Orange, FL
Manufacturer:
Clausing presses
Model:
SERIES P
Capacity:
2.51" (64mm) maximum

Specifications

Condition:
new
Stock number:
BP-70
Type:
Standard Auto feed reversing for tapping Model
3,600:
124 - 2,440 rpm
Maximum:
43.3" (1100mm) 63" (1600mm)
Weights:
Net weight 4,078 lbs (1850Kg) 4,629 lbs (2100Kg)
Warranty:
1 YEAR
Bp-70/70l:
1,200 40 - 748 rpm
Capacities:
Maximum drilling capacity in steel 2.76" (70mm)
Dimensions:
Height (A) 103.1"/122.8" (2620/3120mm)
900 / 1,800:
31 - 1,120
1,800 - 3,600:
62 - 2,240
Spindle taper:
5MT
Manufacturer 2:
Clausing
Quill diameter:
3.54" (90mm)
Base length (b):
62.6"/64.6" (1590/1640mm)
Shipping weight:
4,630 lbs (2100Kg) 5,291 lbs (2400Kg)
Main motor power:
10 Hp (7.3Kw)
Overall width (i):
47.24" (1200mm)
Worktable width (f):
27.56" (700mm)
Spindle speeds (rpm):
62-81-104-133 191-250-321-410 532-683-878-1120 —
Spindle to table (c):
Minimum 9.06" (230mm) 23.6" (6000mm)
Worktable height (g):
27.56" (700mm)
Worktable length (h):
35.43" (900mm)
Head geared-motor power:
1.5 Hp (1.1Kw)
Maximum head height (e):
120.1" (3050mm) 139.8" (3550mm)
Coolant pump motor power:
.12 Hp (.09Kw)
Number of automatic feeds:
6
Tapping capacity in steel:
2.51" (64mm) maximum
Drilling capacity in steel:
2.75" (70mm) maximum
Spindle center to column (d):
20.67" (525mm)
Tapping capacity in cast iron:
2.68" (68mm) maximum
Drilling capacity in cast iron:
3.14" (80mm) maximum
Spindle travel (drilling depth):
10.24" (260mm)
Maximum tapping capacity in steel:
2.51" (64mm)
Auto feed range in./rev. (mm/rev.):
.0039/.0079/.118/.157/ .197/.236 (.1/.2/.3/.4/.5/.6)
Number of speed (see speed charts):
12
Optional spindle taper (on request):
ISO-40/50
Maximum tapping capacity in cast iron:
2.68" (68mm)
Maximum drilling capacity in cast iron:
3.14" (80mm)
Shipping dimensions (length x width x height):
56" x 111"/130" x 79" (1.4 x 2.8/3.3 x 2m)
Subcategory:
Drills

Description

ITEM: 2.76" Geared-Drive Prismatic Column Drills
MAKE: CLAUSING/IBARMIA®
MODEL: SERIES P
PART# BP-70 / BP-70L / BP-70RS / BP-70LRS
Product Features
Series P Geared-drive Prismatic-column Drills With Electromagnetic Clutch Automatic Feed Control
The P series Industrial Drilling Machines are built with an extra heavy-duty base and worktable to handle large and heavy work pieces
Drilling capacity in steel: 2.75" (70mm) maximum
Drilling capacity in cast iron: 3.14" (80mm) maximum
Tapping capacity in steel: 2.51" (64mm) maximum
Tapping capacity in cast iron: 2.68" (68mm) maximum
Automatic feed reversing system for tapping on “RS” models
Adjustable vertical position of head by geared-motor
Large worktable with 3 T-slots
Hardened and ground high quality steel gears
Gear box lubrication by automatic pump
Guide ways lubricated by manual pump
Speed plate and selecting levers on front of head
Coolant tank and pump in machine base
Automatic feed and cut-off by electromagnetic clutch
Work light
Front hand wheel for fine feed work
Depth scale and adjustable depth stop
Built-in low voltage electrical equipment in column rear
Emergency STOP
Automatic tool ejector
Forward and reverse turn push buttons
Drill guard with microswitch
Options/Accessories
Automatic pitch control tapping with single speed brake motor
Automatic pitch control tapping with pneumatic rapid approach
Master guide spindle and nut set for automatic pitch control tapping
Pneumatic counterbalance with rapid approach and retract
Pneumatic counterbalance with rapid approach and retract for tube and and profile drilling
Pneumatic counterbalance with rapid approach and retract with pitch controlled tapping
50% lower feed range
Mechanical spotface device
Pneumatic counterbalance
Multi-spindle head guide rod
Union, dragging cone and assembly for multi-spindle head
START-STOP and emergency STOP pendent control
Pendant control panel with all functions
Cross slide table
ISO-40 spindle with quick change nut (models BP-40,50,70)
ISO-50 spindle with quick change nut (models BP-70 only)
PART # ITEM
7044 Coolant System with separate tank (all models)
7022 Worklight with magnetic base (all models)
PST Cycle or spindle turn START foot pedal
PSR Spindle reverse foot pedal (for tapping)
MH-4 Cross Slide Table 27.56" x 14.17"
(Series P for Models BP-40, BP-50, BP-70) 661 lbs
RPF-P Automatic pitch controlled tapping with single speed brake-motor
RPF-ANR-P Automatic pitch controlled tapping with pneumatic rapid approach
HGP-P Master guide spindle and nut set for automatic pitch controlled tapping
ACNL-P Pneumatic counterbalance with rapid approach and retreat
ACNL-S-P Pneumatic counterbalance with rapid approach
and retreat for tube and profile drilling
ACNL-RPF-P Pneumatic counterbalance with rapid approach
and retract with pitch control tapping
AR-P 50% lower feed rate range
DLM-P Mechanical spotface device
CN-P Pneumatic counterbalance for spindle return
UN-P Union, dragging cone and assembly for multi-spindle hea