Top Seller
SHARP LMV/MP-2 / LMV-50/MP-2 in
Location:
Port Orange, FL
Manufacturer:
Sharp
Model:
LMV/MP-2 / LMV-50/MP-2
Capacity:
Table travel 11" x 25"
Weight:
3,200 lbs.

Specifications

Condition:
new
Stock number:
LMV/MP-2
440v:
3KVA/7.5 amps
Table:
Working surface 9” x 42"
Taper:
R-8
Spindle:
Motor 3 HP
Table 2:
Working surface 9” x 50"
Capacity:
Table travel 11" x 25"
Warranty:
1 YEAR
Capacity 2:
Table travel; x-axis 37"
Net weight:
3,200 lbs.
Ram travel:
12"
Head swivel:
360°
Knee travel:
16"
Run options:
Single step, dry run, graphics only, manual positioning
Net weight 2:
3,250 lbs.
Wiring voltage:
220/440v, 3 phase, 60 Hz
Quill feed (ipr):
0.0015”, 0.003”, 0.006"
Special features:
Custom pockets, repeat, rotate, mirror image.
Speed (vari-speed):
60-4,500 RPM
Dimension functions:
Abs/inc, polar/cartesian, inch/metric.
Dimensions & weight:
Floor area (w x d) 7" x 6.5"
T-slot number, size:
3, 5/8"
Calculator functions:
Geometry, trig.
Head tilt up-and-down:
45°
Quill travel (z-axis):
5"
Saddle travel; y-axis:
12"
Head tilt; right-to-left:
45°
Spindle to nose to table:
2-1/8” - 18"
Total power consumptions:
220V 3KVA/15 amps
Spindle to column (min-max):
6-3/4" - 18-1/2"
Head tilt up-and-down (each way):
45°
Head tilt; right-to-left (each way):
45°
Subcategory:
Mills
Subcategory 2:
Vertical knee type

Description

ITEM: 9" x 42" - 50" CNC Vertical Knee Mills with 2-Axis ACU-RITE MILLPWR
MAKE: SHARP®
MODEL: LMV/MP-2 / LMV-50/MP-2
Product Features
LMV/MP-2
CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes. The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code
Millpower is a full – featured 2-axes control/3-axes readout with a number of software and hardware features
SOFTWARE
Dimension functions: Abs/inc, polar/cartesian, inch/metric
Programming
Program in/out, position/drill, mill lines, mill arc, blend (corner radius)
Holes (bolt circle, rectangular array, rectangular fram, line)
Circle (pocket, fram, ring), rectangle (pocket, frame, slot, facing)
Special features: Custom pockets, repeat, rotate, mirror image
Run options: Single step, dry run, graphics only, manual positioning
Calculator functions: Geometry, trig
HARDWARE
Operator console: Easy to use format. Conversational english. Three dimensional hard keys. 10” flat panel, color lcd display. Remote stop/go switch
Controller cabinet: Heavy duty enclosure modular construction, 486sx microprocessor. 115vac – 20 amps
Positioning: Precision glass scale linear encoders. Closed loop feedback through servo amplifiers. DC servo motors. Precision ground ball screws
"Bridgeport-type" mill
STANDARD EQUIPMENT
Hard-chrome ways
Front and rear way covers
Automatic Lube System
Tool Kit includes: Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, Flat head screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
LMV-50/MP-2
CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes. The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code
HEAD
To dissipate heat in the 3 HP motor driven head, a pair of high output fans is installed. This allows the machine to work demanding jobs for extended periods without damaging the motor, belts and bearings. A unique SHARP feature
The motor shaft and Vari Drive pulleys are dynamically balanced, then hard-chromed this allow a vibration free milling even at high speed
Since the Vari-speed drive system is operated by sliding the Vari Drive pulley up and down the motor shaft. The motor shaft is therefore chrome-plated, and has an oil channel that is fed by a grease fitting on the lower end for self-lubricating purpose. This ensures the sliding motion is trouble free at all times. A unique SHARP feature
The motor shaft that drives the pulley and the spindle is subject to a lot of lateral stress. A roller bearing is installed for the lower support of the motor shaft. A unique SHARP feature
Beside swiveling 90 degree side to side, the head can also swivel up and down by virtue of a knuckle joint design. The new design developed by Sharp uses 6 bolts, 3 each side, that fitted into a circular T-slot milled at the inside of the over arm and secured by nuts from the outside. It secured the head tig