Top Seller
VICTOR VICTOR-65 63" x 27"
Location:
Port Orange, FL
Model:
VICTOR-65
Control:
Fanuc 0-MC

Specifications

Condition:
new
Stock number:
VICTOR-65
Motor:
Spindle (cont. / 30 min.) 15 hp / 20 hp
Other:
Air source > 80 psi
Table:
Table Size 75” x 26”
Y-axis:
27.5"
Z-axis:
25.5"
Spindle:
Spindle taper #50
Travels:
X-axis 63"
Warranty:
1 YEAR
Feed rates:
Rapid traverse on X 600 in/min
Tool holder:
CT-50 (BT-50)
Chip to chip:
8 sec.
T-slot width:
0.866”
Tool to tool:
4 sec.
Spindle speed:
4,500 rpm
Cnc controller:
Fanuc 0-MC
Tool selection:
Random Bi
X digital servo:
4.0 hp
Y digital servo:
4.4 hp
Z digital servo:
4.4 hp
Max. tool length:
11.8"
Max. tool weight:
33 lbs.
Cutting feed rate:
200 in/min
Number of t-slots:
5
Max. load capacity:
6,000 lbs.
Floor space (w x l):
177” x 126”
Rapid traverse on y:
470 in/min
Rapid traverse on z:
470 in/min
Weight & dimensions:
Machine height 119"
Coolant tank capacity:
50 gal
Machine weight (lbs.):
28,700
Tool magazine capacity:
24
Zf gear box (optional):
4,500 high rpm / 1,125 low rpm
Auto tool changer (optional):
Type Arm Type
Spindle nose to table surface:
6” ~ 31.5”
Spindle center to column distance:
28.5"
Max. tool diameter (no adjacent tool):
4.3” (7.8”)

Description

ITEM: 63" x 27" x 25" Super Heavy-Duty Machining Center
MAKE: VICTOR®
MODEL: VICTOR-65
Product Features
EXTREMELY STABLE BASE : Wide stance of 4-slideway base insures maximum stability of the machine regardless of the table position
RUGGEDLY CONSTRUCTED THROUGHOUT : The base, column, spindle head, saddle and table are all manufactured from high quality rib reinforced fine-grain Meehanite casting to maximize the rigidity of individual components
FULL STROKE SUPPORT FOR CROSS TRAVEL : Special designed table slideway base provides strong support for the table across entire travel. This eliminates the suspension problem when table is heavily loaded and at its outer travel range
PYRAMID CONSTRUCTION FOR RIGIDITY : The sloping profile at front and side of the machine creates a pyramid structure that optimizes the rigidity of the machine. Maximum number of foundation bolts are used to completely secure the base and eliminate vibration
PRECISION SPINDLE HEAD: The cartridge type spindle is installed with ABEC-7 class bearings to provide accuracy and high rigidity in both axial and radial directions. The cooling jackets are designed in the sindle cartridge surrounding the front and rear bearing locations to isolate heat transfer and minimize thermal growth of the spindle column. This design promotes accuracy during heat intensive heavy-load machining
OVER-SIZED SERVO MOTORS: Over-sized servo motors not only increase the work-load capacity of the machine, and also drastically inmprove the machine's acceleration/deceleration characteristics. This design allows the machine to make smoother cuts during contouring and run at a lower servo load to increase the life time of the motor
HIGH QUALITY BALLSCREWS: Only the highest quality C-3 precision class ballscrews are used. These ballscrews are precsion ground and finished and then installed with a pre-load double nut. These premium-quality ballscrews are of higher quality than the C-5 class rolled finish. The high precision ballscrews guarantee that the accuracy will be maintained during fast and heavy cuts
DIRECT COUPLED DRIVING SYSTEM: The servo motors are direct coupled to the ballscrews using zero-backlash steel couplings to eliminate wind-up, even under severe loading. As a result, contouring interpolation is smoother, corners cutting is sharper, and hole drilling is more precise. The ballscrews are also pretensioned to minimize the effects of heat expansion during high duty cutting cycles
EQUIPPED WITH
Massive over-ribbed cast iron construction
High dampening box type slideway
Oversized direct-coupled servo motors
High precision C-3 double-nut preloaded ballscrews
Wide range spindle motor arm type Auto Tool Changer
Oil-cooled high mount arm type Auto Tool Changer
Spindle oil cooler
Rigid tapping
Floating type tool unclamping mechanism
Fanuc 0-MC CNC controller
Leveling bolts and pads
Alarm light
Work light
Operation and maintenance manual
Options/Accessories
Spindle speed 6,000 / 8,000 rpm
Rotary table with